|
Post by norton81 on Aug 29, 2019 3:36:50 GMT -5
Thank you very much for the answer
|
|
|
Post by brandon78 on Sept 9, 2019 12:02:52 GMT -5
2001 mercury running stock motor and trans is there a transmission temperature sensor on these cars if so where would I find it thank you for the help
|
|
Vito324
Feature Winner
For badass roof signs, Check out BlackFlag Designs on Facebook!
Posts: 2,189
|
Post by Vito324 on Sept 30, 2019 8:53:26 GMT -5
Has anyone ever made a harness for these?
|
|
|
Post by 513monster on Sept 30, 2019 10:00:22 GMT -5
could make a killing if they did
Only bad part is the different computers/wiring between the years, and the lincolns compared to the vics/mercs.
|
|
|
Post by stellis124 on Oct 1, 2019 6:52:29 GMT -5
Has anyone ever made a harness for these? there is a video on youtube of a guy making a stand alone harness for the 4.6 its not derby related he made it for a pick up truck, I got in contact with the guy and asked how much to make me 1 he said around a 600- 1,000 USD depending on my year of car. If you were to watch the video you could probably make 1 using his R&D its messy tho
|
|
|
Post by smashford on Oct 1, 2019 11:09:01 GMT -5
Theres people doing it on their own for hot rods isnt there enough harness to move it out of the way factory?
|
|
|
Post by 513monster on Oct 1, 2019 17:12:08 GMT -5
Theres people doing it on their own for hot rods isnt there enough harness to move it out of the way factory? yes, but imagine spending less time unclipping/unbolting a ton of stuff, hooking a few wires up, gaining horsepower/running cooler(programmed ecm) and deleting limp mode. and being able to move it car to car quickly(i'd just cut most of the other wiring and unbolt/unplug) a few things. Would certainly make the process much quicker
|
|
|
Post by smashford on Oct 1, 2019 17:22:40 GMT -5
Yeah, I understand that. I have never ran the 4.6 (yet) but i understand it to not take terribly long
|
|
|
Post by JR/77x on Jan 6, 2020 14:28:16 GMT -5
.
|
|
Landshark007
Feature Winner
I'm not here to win I'm here to make sure you don't win
Posts: 4,228
|
Post by Landshark007 on Apr 14, 2020 22:20:34 GMT -5
|
|
Vito324
Feature Winner
For badass roof signs, Check out BlackFlag Designs on Facebook!
Posts: 2,189
|
Post by Vito324 on Jun 2, 2020 8:30:37 GMT -5
Do you guys run the o2 sensors or do you just unplug em?? I’ve got a 09 p71 I wanna run in a gut n go derby around here.
|
|
ron17t
Feature Winner
Posts: 1,180
|
Post by ron17t on Jun 2, 2020 19:43:25 GMT -5
I always run them,they just seem to run better overall. All I do is pop a hole in the pipes I put on and tack weld the sensors in so it only takes a couple minutes
|
|
|
Post by settleit on May 24, 2021 21:34:12 GMT -5
How are you guys running a starter button "like sbcs"? I've only ever ran street stocks and not really sure what to do.
Do you run a wire to the solenoid/starter wire, then run another to the hot with a switch between?
|
|
|
Post by unicorn519 on Jun 3, 2021 6:58:33 GMT -5
Running a 96 Lincoln with a 4.6L gut and go class. What do I need to move and how do you prevent it from going into limp mode? How are you all running the fuel? cell or stock tank? Dash is staying in the car.
|
|
Punisher 66J
Feature Winner
F**K WELD CLASS, STOCK IS FOR TRUE DERBY DRIVERS!!!
Posts: 3,789
|
Post by Punisher 66J on Jun 3, 2021 7:12:39 GMT -5
Running a 96 Lincoln with a 4.6L gut and go class. What do I need to move and how do you prevent it from going into limp mode? How are you all running the fuel? cell or stock tank? Dash is staying in the car. NO offense but did you read any of this thread?
|
|