|
|
Post by superman180 on Apr 30, 2020 21:04:48 GMT -5
Need to beef up stock 64 IMP wheels, thinking about just welding bead guard, or should I be welding in centers too? I would rather not bend a axle. Thoughts. I didn’t read thru the 35 pages hoping someone will chime in first.
Thanks.
|
|
noser23x
Feature Winner
R.W.C.
Posts: 1,980
|
Post by noser23x on Apr 30, 2020 21:50:43 GMT -5
Need to beef up stock 64 IMP wheels, thinking about just welding bead guard, or should I be welding in centers too? I would rather not bend a axle. Thoughts. I didn’t read thru the 35 pages hoping someone will chime in first. Thanks. Even on stocker builds if I can I still like to fun a 1/4" full center. For example stock spindle shows I still will put a 1/4" full center in, they still bend but wont break the spindle. |
|
|
|
Post by superman180 on May 2, 2020 21:11:29 GMT -5
Need to beef up stock 64 IMP wheels, thinking about just welding bead guard, or should I be welding in centers too? I would rather not bend a axle. Thoughts. I didn’t read thru the 35 pages hoping someone will chime in first. Thanks. Even on stocker builds if I can I still like to fun a 1/4" full center. For example stock spindle shows I still will put a 1/4" full center in, they still bend but wont break the spindle. So welding a plate into the back side of wheel? Could you post a pic or a link of an example? Thanks. |
|
noser23x
Feature Winner
R.W.C.
Posts: 1,980
|
Post by noser23x on May 3, 2020 1:03:33 GMT -5
Even on stocker builds if I can I still like to fun a 1/4" full center. For example stock spindle shows I still will put a 1/4" full center in, they still bend but wont break the spindle. So welding a plate into the back side of wheel? Could you post a pic or a link of an example? Thanks. Here you can kind of see it, 8 lugs are 3/8", fronts are a 1/4". Hope that helps a little bit, not greatest picture.  |
|
|
|
Post by settleit on Nov 26, 2020 23:16:09 GMT -5
Thinking about having some lip rings put on each side of some D slots, and was wondering if there would be any clearance issues with the back catching on stock 8.8s with brakes?
|
|
noser23x
Feature Winner
R.W.C.
Posts: 1,980
|
Post by noser23x on Nov 29, 2020 20:33:00 GMT -5
I have been working on these. Basically you would buy a wheel blank kit, and build the rest of the rim.  |
|
|
|
Post by derbi101 on Feb 17, 2021 10:43:34 GMT -5
How are rims from a police interceptor?
|
|
|
|
Post by sweet16 on Feb 20, 2021 15:11:46 GMT -5
Building a set of nissans for a Accord. Did some research an looks like I dont need to offset these style of wheels . Can anyone confirm this?
|
|
|
|
Post by Gumnutz114 on Aug 3, 2022 17:26:31 GMT -5
So i've just bought a set of 15" rally tires to use on my cars next year. My question is what is my best bet for running 2 different stud patterns other than a weld in center. I'm from half way across the world so dont have access to all the derby related products which does make it a bit harder and all our derbies here are all fairly stock. I Want to run 5x114.3 (5x4.5) and 5x120 (5x4.72). Thanks  |
|
|
|
Post by ADDICTEDtoIMPACT on Aug 16, 2022 19:01:40 GMT -5
What 8" rims is are popular? Somebody gave me a set of 8" forklift tires that takes air. They are not solid. They will obviously be rear tires on a compact
|
|
