|
|
Post by fallinskiestwice on May 2, 2018 4:15:53 GMT -5
What section of the campground is going to be the "family/quiet time" section? Thanks If it's the same as last year you can pick your spot when you get there. Just look at the map and pick a spot away from the populated areas. The grounds are huge and there's usually a lot of empty areas. The further from the track the quieter. |
|
|
|
Post by demoderby721 on May 3, 2018 11:13:27 GMT -5
What section of the campground is going to be the "family/quiet time" section? Thanks If it's the same as last year you can pick your spot when you get there. Just look at the map and pick a spot away from the populated areas. The grounds are huge and there's usually a lot of empty areas. The further from the track the quieter. Easy enough! Thanks |
|
|
|
Post by wldtmike07m on May 5, 2018 7:52:15 GMT -5
What we will be doin again this year hope it works out like last year just pay for everything right there and pick a spot
|
|
|
|
Post by frankthetank on May 5, 2018 11:40:44 GMT -5
When you pay for camping at the show there will be someone there to direct you to your spot.
|
|
|
|
Post by jerm80 on May 6, 2018 7:54:00 GMT -5
So if I want to come and watch just on Saturday for 3 of us it will cost $225.00?  Am I reading this right? |
|
|
|
Post by lahnen on May 12, 2018 10:12:19 GMT -5
80's wire class cars, can tank protector touch sheet metal at back seat area?
|
|
|
|
Post by frankthetank on May 12, 2018 16:07:40 GMT -5
80's wire class cars, can tank protector touch sheet metal at back seat area? nO IT MUST BE 6" AWAY FROM SHEET METAL |
|
|
|
Post by kyle226 on May 12, 2018 17:39:19 GMT -5
Rules for 80 wire doesn't state anywhere it has to be 6 inches off sheet metal.
|
|
|
|
Post by dtrif21 on May 14, 2018 18:49:18 GMT -5
So how many sub framers are coming to play this year. ??
|
|
|
|
Post by cowboytroy on May 15, 2018 8:16:10 GMT -5
How about a drivers list
|
|
|
|
Post by derbyman on May 15, 2018 11:08:20 GMT -5
Do fires in camping area have to be off ground?
|
|
|
|
Post by 311dpegg on May 15, 2018 16:26:33 GMT -5
Like Kyle stated, rules don’t say how the gas tank protector can not touch. It says we can run them and they can be 32” wide ( rule #8 on Smashit web sit). If there was a specific distance it had to be off the rear sheet metal, that would have been a good time to state that. You tell us not to try to read into rule but then you don’t give us all the info we need to build a car. Not all of us can read minds guys.
|
|
|
|
Post by kyle226 on May 15, 2018 17:00:28 GMT -5
Looks like a lot of cars won't be running in that class or if they do they will be without a gtp. Not like that's a easy fix at the track
|
|
|
|
Post by lahnen on May 15, 2018 17:17:04 GMT -5
Alot of vague areas in these rules for sure.
|
|
|
|
Post by frankthetank on May 15, 2018 19:29:32 GMT -5
Rules for 80 wire doesn't state anywhere it has to be 6 inches off sheet metal. Your right it doesn't so this year I will live with them touching |
|
Am I reading this right? 
