|
Post by Luke Wells on May 17, 2014 16:41:55 GMT -5
i didnt think they made a 74 polara? I was thinking the same thing when I read it earlier.
|
|
|
Post by dkarshuk03 on May 17, 2014 20:26:44 GMT -5
How good are the 75 Newport bumpers? I know its considered a flat bumper but it looks like it has a slight point and 2 small vent holes on each side of the license plate. And the rear bumper has a cut in the top middle to accomodate for the bottom of the rear license plate and it has 2 marker lights on the outsides as well :/ I havent heard anything about these specific bumpers and I have never run a Chrysler bumper before...
|
|
|
Post by dkarshuk03 on May 17, 2014 20:30:51 GMT -5
Also, on pointy New Yorker front bumpers, do you guys trim the chrome off the ends? Im getting a preran front, and it looks like the ends are curled but im thinking (and hoping) that its just the chrome skins that make it look that way...
|
|
dm440c
Feature Winner
derby drivers against drama- there's no crying in demo derby!
Posts: 2,824
|
Post by dm440c on May 18, 2014 9:25:24 GMT -5
i didnt think they made a 74 polara? I was thinking the same thing when I read it earlier. they didn't. Prior to 74 the C body had two names, the Polara was the lower trim level and the Monaco was the upper trim level. In 74 they dropped the Polara name and the C body was the Monaco and the B body was still the Coronet.
|
|
dm440c
Feature Winner
derby drivers against drama- there's no crying in demo derby!
Posts: 2,824
|
Post by dm440c on May 18, 2014 9:25:58 GMT -5
How good are the 75 Newport bumpers? I know its considered a flat bumper but it looks like it has a slight point and 2 small vent holes on each side of the license plate. And the rear bumper has a cut in the top middle to accomodate for the bottom of the rear license plate and it has 2 marker lights on the outsides as well :/ I havent heard anything about these specific bumpers and I have never run a Chrysler bumper before... I'm a fan of both
|
|
|
Post by 48getbent1988 on May 19, 2014 16:18:10 GMT -5
Ya I don't know if they made one or not in 74 I got a guys number form a friend that saw some 70's style car so I call him up and he said he had 3 73 or 74 that has the steel backing so I was seeing if they were worth my time to drive over they and see but I guess I'll have to just take a ride over and see
|
|
dm440c
Feature Winner
derby drivers against drama- there's no crying in demo derby!
Posts: 2,824
|
Post by dm440c on May 20, 2014 6:53:48 GMT -5
Ya I don't know if they made one or not in 74 I got a guys number form a friend that saw some 70's style car so I call him up and he said he had 3 73 or 74 that has the steel backing so I was seeing if they were worth my time to drive over they and see but I guess I'll have to just take a ride over and see ask him to read off the VIN for you. If the 6th digit is a "4" then go on over but if it is a "3" stay home.
|
|
|
Post by TeamMASS#16 on Oct 27, 2014 16:11:48 GMT -5
Just a quick question how much are you guys generally paying for pointys at scrap yards and how good do they hold up in lightly modded cars without being loaded
|
|
|
Post by 513monster on Oct 27, 2014 16:26:12 GMT -5
The bumper "should" outlast the car...or a few. It will probably push up depending on how its mounted, if your car doesn't nose up fast enough.
|
|
|
Post by TeamMASS#16 on Oct 27, 2014 16:36:47 GMT -5
In my area modded means stock but with bumper and engine swaps with threaded rod 4/fender hood and trunk nothing else
|
|
|
Post by TeamMASS#16 on Oct 27, 2014 16:38:52 GMT -5
The bumper "should" outlast the car...or a few. It will probably push up depending on how its mounted, if your car doesn't nose up fast enough. Not sure what kinda car it is going on yet maybe 80's and newer or an old iron caddy
|
|
|
Post by wildman07 on Nov 1, 2014 20:11:55 GMT -5
Are 76 fury front bumpers any good? Seems like it has a desent backing to it.
|
|
|
Post by seventyonehemicuda on Nov 1, 2014 23:13:56 GMT -5
Are 76 fury front bumpers any good? Seems like it has a desent backing to it. Is it good for what? y framer? k car? shocker? FMJ body? looking at? overall its a solid bumper.
|
|
|
Post by wildman07 on Nov 2, 2014 8:43:23 GMT -5
On the front of either my 76 fury or 68 fury. I'm aloud to weld all seems and weld all mounts shocks etc. I was just wondering how they held. And one more question guy I work with gave me the bumpers off his 73 challenger they seem like that have a descent backing to them has any body ever used them before and how did they work. Thanks
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 2, 2014 10:54:02 GMT -5
On the front of either my 76 fury or 68 fury. I'm aloud to weld all seems and weld all mounts shocks etc. I was just wondering how they held. And one more question guy I work with gave me the bumpers off his 73 challenger they seem like that have a descent backing to them has any body ever used them before and how did they work. Thanks Sell those Challenger bumpers to a collector.. Sent from my XT907 using proboards
|
|