|
Post by hellbent09 on Oct 5, 2013 17:11:09 GMT -5
hmmm... mine aint lol
|
|
|
Post by race619 on Oct 6, 2013 10:02:36 GMT -5
Mustangs and pintos are factory front sumps from what i remember did you have to modify anything schaffer?
|
|
|
Post by hellbent09 on Oct 6, 2013 14:34:02 GMT -5
Who is this ^^^
|
|
|
Post by race619 on Oct 6, 2013 14:47:38 GMT -5
Name is brandon weve never met but have mutual friends
|
|
|
Post by hellbent09 on Oct 7, 2013 9:43:13 GMT -5
On what lol. Where ya from
|
|
|
Post by sc00ter on Oct 7, 2013 12:14:31 GMT -5
hmmm... mine aint lol wtf did you have to move motor mounts or anything? I hope my small block fits that good
|
|
|
Post by race619 on Oct 7, 2013 13:51:36 GMT -5
From northern ky and how much modification to get a rear sump 2.3 in a mustang 2
|
|
|
Post by C4 on Oct 7, 2013 16:34:29 GMT -5
Hopefully not much. Gonna do it this coming weekend.
|
|
|
Post by hellbent09 on Oct 7, 2013 19:44:22 GMT -5
A lot really lol. Your gonna need a porta power and some lube lol
|
|
|
Post by hellbent09 on Oct 7, 2013 19:47:17 GMT -5
You gotta get REAL creative!
|
|
|
Post by C4 on Oct 7, 2013 20:19:54 GMT -5
Ok......will an older front sump Pinto pan fit on a mid 80's engine from a fox body?
|
|
|
Post by sc00ter on Oct 7, 2013 21:38:00 GMT -5
Our idea was to unbolt the motor mount move them back 3 inches cut out the fire wall then put the motor in and reweld the fire wall back and put a kicker straight to the dp off the cage
|
|
|
Post by race619 on Oct 7, 2013 21:42:38 GMT -5
I think it will c4 put you'll need a different pick up tube obviously
|
|
|
Post by C4 on Oct 7, 2013 22:15:07 GMT -5
I think it will c4 put you'll need a different pick up tube obviously My thinking was to use the pump & pickup tube from the Pinto engine along with the pan.
|
|
|
Post by cheater22x on Oct 8, 2013 9:31:00 GMT -5
y not just swap pump and pan ? you will loose the dipstick tho. just a thought guys
|
|