|
Post by sparks11x on Dec 1, 2015 6:21:30 GMT -5
I have last year's but from what I'm understanding their changing some stuff this year
|
|
|
Post by mcw731 on Apr 4, 2016 20:33:08 GMT -5
How are these in front of the a arms forward as far as collapsing like a typical full-size GM, the angle is much straighter coming out from the a arms and was wondering how hard they are to nose up
|
|
|
Post by skittles27e on Jul 3, 2016 17:36:22 GMT -5
TTTT
|
|
|
Post by johntawn on Jul 8, 2016 10:49:57 GMT -5
Would you build these the same as a full sized metric?
|
|
|
Post by peckerwrecker on Jul 8, 2016 11:41:24 GMT -5
so what you guys are saying is i could take one of the old racecars and put one of the crate motors in it and build it and run it as a compact?
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Jul 8, 2016 19:21:16 GMT -5
If ur compacts allow 108 wheelbase yes
|
|
|
Post by smashbob12 on Jul 8, 2016 20:30:35 GMT -5
so what you guys are saying is i could take one of the old racecars and put one of the crate motors in it and build it and run it as a compact? if your rules also don't have the clause, no full frame compacts.
|
|
|
Post by C4 on Jul 8, 2016 23:16:59 GMT -5
so what you guys are saying is i could take one of the old racecars and put one of the crate motors in it and build it and run it as a compact? No full frame clause out here, but the cage would have to go out from under the hood and in the trunk, along with any pipe job core support, and an after market tube chassis wouldn't fly.
|
|
|
Post by JWG G24 on Nov 20, 2016 9:59:46 GMT -5
Just picked up an 82 cutlass with a 3.8 my question is does it come with a Chevy or Buick 3.8? Thank you
|
|
|
Post by destroyer14 on Nov 20, 2016 11:59:53 GMT -5
Dist should be in front at angle.its a buick V6
|
|
|
Post by tofer97 on Jan 3, 2017 3:25:11 GMT -5
Much luck with an '82 4 door Malibu? I'm sure there's pictures on here of them but didn't know if they held up against old iron. Might be running one as a mild weld/bone stock car and there's usually a few old iron caddy's and impalas that show up. Car has a 4.3 with a 4bbl carb and intake so I'm planning on running it considering it's a 305 minus 2 cylinders.
|
|
|
Post by andrewfromky on Oct 23, 2017 14:13:05 GMT -5
I just bought an 82 regal. I'm new to g body's I have a 358 sbc with a th400 and an 8.5 rear end that I will swap in. And I will prebend rear quarter panels and push them in and I will notch rear frame in 2 different locations. I also will cut the aluminum backing off the bumper and just bolt the steel bumper on front and rear. I also will cut front fenders and raise front end 3 inches. Any other suggestions or any problems with this set up? Ive been out of derby scene for 10 years and just,now getting,back in to it. Thanks!
|
|