411ng
Future Icon
Posts: 26
|
Post by 411ng on Oct 30, 2015 19:33:13 GMT -5
Anybody running these cars still? Have some questions
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,123
|
Post by demoboy333 on Oct 31, 2015 12:20:49 GMT -5
Anybody running these cars still? Have some questions Still running ours that we built in 2010....
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 31, 2015 17:40:25 GMT -5
Anybody running these cars still? Have some questions Ran one this year.
|
|
|
Post by sparks11x on Nov 29, 2015 20:35:00 GMT -5
Picked up an 84 olds cutlass. Few questions, it has the 3.8 with hei so only thing I need is the power wire to distributor to make this engine run correct. And where are you guys tilting them and about how much
|
|
|
Post by C4 on Nov 29, 2015 21:09:11 GMT -5
Picked up an 84 olds cutlass. Few questions, it has the 3.8 with hei so only thing I need is the power wire to distributor to make this engine run correct. And where are you guys tilting them and about how much Yes, one wire...I've had better luck buying an older distributor with vacuum advance. Unsure whether 83 is vacuum or electronic.
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,123
|
Post by demoboy333 on Nov 29, 2015 23:41:34 GMT -5
Picked up an 84 olds cutlass. Few questions, it has the 3.8 with hei so only thing I need is the power wire to distributor to make this engine run correct. And where are you guys tilting them and about how much U tilt till the frame sits level.
|
|
|
Post by sparks11x on Nov 30, 2015 12:41:41 GMT -5
Picked up an 84 olds cutlass. Few questions, it has the 3.8 with hei so only thing I need is the power wire to distributor to make this engine run correct. And where are you guys tilting them and about how much U tilt till the frame sits level. Ok where is best on these cars at firewall or cross member
|
|
|
Post by sparks11x on Nov 30, 2015 12:42:43 GMT -5
Picked up an 84 olds cutlass. Few questions, it has the 3.8 with hei so only thing I need is the power wire to distributor to make this engine run correct. And where are you guys tilting them and about how much Yes, one wire...I've had better luck buying an older distributor with vacuum advance. Unsure whether 83 is vacuum or electronic. Not sure either ill have to look again tonight
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,123
|
Post by demoboy333 on Nov 30, 2015 16:20:51 GMT -5
U tilt till the frame sits level. Ok where is best on these cars at firewall or cross member Depends. Are you using stock cross member
|
|
|
Post by sparks11x on Nov 30, 2015 19:22:58 GMT -5
Ok where is best on these cars at firewall or cross member Depends. Are you using stock cross member Yes stock drivetrain. Rules state has to have rubber mounts
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,123
|
Post by demoboy333 on Nov 30, 2015 20:47:26 GMT -5
Then I'd tilt at cross member to keep it all in line. If u tilt at firewall it moves stuff a lil
|
|
|
Post by sparks11x on Nov 30, 2015 20:51:17 GMT -5
Then I'd tilt at cross member to keep it all in line. If u tilt at firewall it moves stuff a lil Ok thanks never built one of these cars before
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,123
|
Post by demoboy333 on Nov 30, 2015 20:56:09 GMT -5
Depending on ur rules u could make it a front end car that u can run all day with just one simple wording in ur rules.
|
|
|
Post by sparks11x on Nov 30, 2015 21:14:12 GMT -5
That's what I'm hoping cause it will run with our v6 class so I'm hoping it can do well considering its a full frame car
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,123
|
Post by demoboy333 on Nov 30, 2015 23:29:43 GMT -5
Got a copy of ur rules?
|
|