|
Post by XtremeMopar#307 on Sept 28, 2013 22:53:20 GMT -5
Any info on putting a sbf 302/351w into a y framer mopar?
|
|
|
Post by fackelberry on Sept 10, 2014 19:07:40 GMT -5
Any other pictures of how to mount a SBC into a 64-66 imperial? Thanks
|
|
|
Post by stack21 on Nov 6, 2014 11:15:52 GMT -5
|
|
|
Post by stack21 on Nov 6, 2014 11:17:27 GMT -5
Don't mind tht other post I put up. I'm new at all this. What did you guys do with the fan and radiator. When you made the square tubing mount??
|
|
|
Post by STROMI 121 on Nov 6, 2014 20:50:14 GMT -5
You can edit or delete your post by using the drop down box at the top right hand corner of your post. Click on the arrow.
|
|
|
Post by gregory on Jan 22, 2015 12:08:20 GMT -5
Helpful pics "goinpos21",thx. "Jo-Jo"...do U have after pics of your setup back on body? did U have to do much to the firewall?
|
|
|
Post by goinpos2l on Jan 30, 2015 19:14:57 GMT -5
|
|
|
Post by impdriver821 on Mar 8, 2015 22:08:25 GMT -5
First time running a SBC in a shocker. Have a robbo cradle just trying to get some tips on a tranny mount and the best way to do it. It's a stock so so it has to appear as stock as possible to draw less attention any pics or advice would be great. Turbo 400 tranny
|
|
|
Post by derby2racer on Mar 9, 2015 1:14:47 GMT -5
Im putting my sbc in a shocker this year too. Last year I used a y framer and used a piece of c-channel and bolted it into the spot for the trans crossmember.
|
|
|
Post by 262markm on Mar 9, 2015 1:21:06 GMT -5
Trim the tab off the stock crossmember set the engine and trans and suck it tight around the trans protector ... assuming you have one
Sent from my SCH-I545 using proboards
|
|
|
Post by seventyonehemicuda on Mar 13, 2015 23:46:01 GMT -5
First time running a SBC in a shocker. Have a robbo cradle just trying to get some tips on a tranny mount and the best way to do it. It's a stock so so it has to appear as stock as possible to draw less attention any pics or advice would be great. Turbo 400 tranny Doesn't a cradle throw "as stock as possible" and "draw less attention" right out the window? it doesn't matter how much mechanical knowledge anyone has the first time anybody see's a cradle the same thought passes through their mind "OMG! WTF IS THAT?" even if the judges are completely clueless they are going to think that you've stiffened up the cross member.... Ive never seen a stock show that allowed cradles, stock shows are my personal favorite. if i spotted a cradle on a car i'd bitch about it and rat them out yesterday.
|
|
|
Post by newstyle on Mar 24, 2015 13:05:33 GMT -5
Anybody got pics of a sbc 350 in a 67-73 imp sub ? I figured out the motor mounts but having problem with my short tail shaft tranny , and havin my slider rub somewhere
|
|
|
Post by derby2racer on May 23, 2015 6:42:08 GMT -5
Anyone know easiest way to run power steering with sbc in a shocker?
|
|
|
Post by derby2racer on Jul 9, 2015 17:03:45 GMT -5
Someone told me the fitting for small block mopar power steering is the same as chevy, where it connects to the pump. Does anyone know how true this is? Need info asap.
|
|
|
Post by jdam67 on Jul 11, 2015 6:42:06 GMT -5
|
|