|
Post by STROMI 121 on Mar 31, 2018 22:00:27 GMT -5
I am currently building an 10 bolt bia rear. I have a motive gear 8.5 gm kit. The kit is supposed to cover almost all 8.5 rears. The front pinion bearing is correct. But the rear pinion bearing is much bigger. I have the old race with number to go get a new bearing so no big deal. But has anyone else ran into this? The rear was taken in on trade. It's a 10 bolt bia. No idea what it came out of. I always assumed that all 10 bolt bia rears were the same except for width like the ones from midsize. I don't have an issue to resolve. Just really curious.
|
|
|
Post by rhull1977 on Apr 1, 2018 15:12:49 GMT -5
Are you sure its a 8.5 not a 8.2?
|
|
|
Post by STROMI 121 on Apr 2, 2018 9:54:13 GMT -5
I went to advance and got a new bearing. Apparently the bearing was just wrong in the kit I had.
|
|
|
Post by suicidedoorlincoln on Apr 2, 2018 14:16:46 GMT -5
Subscribing
|
|
|
Post by redneckracing12 on Apr 2, 2018 22:20:01 GMT -5
I went to advance and got a new bearing. Apparently the bearing was just wrong in the kit I had. Good deal, atleast it was a easy fix.
|
|
|
Post by trader on Apr 23, 2018 9:17:46 GMT -5
|
|
|
Post by 383 Sonoma on Apr 23, 2018 9:57:39 GMT -5
Yeah as long as it’s a 10 bolt ring gear
|
|
|
Post by watsonmt on Jul 18, 2018 2:03:49 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 18, 2018 11:54:42 GMT -5
Count the teeth on ring,then on pinion,and divide
|
|
|
Post by rhull1977 on Jul 18, 2018 12:00:27 GMT -5
Judging by the large pinion diameter and the thin ring gear its probably 2.73-1
|
|
|
Post by sheffield2 on Apr 26, 2019 19:35:22 GMT -5
Has any one ran the neret c clip axel adapter Was thinking of buying a set
|
|
|
Post by ghall79 on Jul 30, 2019 5:40:31 GMT -5
What rear would be in a 96 caprice? I know it’s just a broad question but I just got the car and haven’t even looked under the back of it yet. Just want to know if it’s worth swapping out with something better. Car will have a sbm drivetrain.
|
|
|
Post by smashford on Jul 30, 2019 9:47:46 GMT -5
10 bolt cclip usually
|
|
|
Post by ghall79 on Jul 30, 2019 13:56:54 GMT -5
Worth swapping out for something better? Would like to put gears in the car so I’m not winding out the motor the whole time. Would really like to run an 8 3/4 and have an all mopar set up. Or can I make a decent rear out of what’s in it? Sorry for all the questions this is the first axle I’ve messed with
|
|
|
Post by Luke Wells on Jul 30, 2019 14:08:43 GMT -5
They are c-clip so if you can, I would swap it for a bolt in.
|
|