|
Post by martin113 on Sept 7, 2016 14:27:07 GMT -5
What are ppl doing with the rear bumper shocks? Leave out or collapse and weld. Building for a stock show also planning on tucking the trunk lid
|
|
|
Post by martin113 on Sept 1, 2016 8:36:46 GMT -5
What are ppl doing with the inner fenders? Take out or leave in
|
|
|
Post by martin113 on Aug 28, 2016 14:54:26 GMT -5
Was thinking about welding the spool type on the cradle.
|
|
|
Post by martin113 on Aug 26, 2016 22:19:40 GMT -5
Running stock class. Any advice on mounting the engine, I can run a cradle but have to use the stock mounts also. I'm running a 360.
|
|
|
Wheels
Aug 26, 2016 15:28:45 GMT -5
via mobile
Post by martin113 on Aug 26, 2016 15:28:45 GMT -5
I'm looking at either running SS or ranger wheels with super sidewall tires. Any opinions on which to go with?
|
|
|
Post by martin113 on Aug 7, 2016 20:34:02 GMT -5
Who makes steering shaft for shocker mopars
|
|
|
Post by martin113 on Jul 29, 2016 14:56:32 GMT -5
So your saying run wire from the body mount bolt to the A piller
|
|
|
Post by martin113 on Jul 28, 2016 15:09:30 GMT -5
Anybody know what kind of steering u joint fits on new gm's? Looking to build a steering shaft
|
|
|
Post by martin113 on Jul 21, 2016 20:52:02 GMT -5
I wouldn't derby it. Ppl are paying good for those now.
|
|
|
Post by martin113 on Jul 11, 2016 9:42:28 GMT -5
Have a couple questions running stock class what is everybodys thoughts on tires? Was thinking 27" sidewinders or kk. The rearend end height should it be low or more level?
|
|
|
Post by martin113 on Jul 2, 2016 0:56:50 GMT -5
No electronic
|
|
|
Post by martin113 on Jun 30, 2016 23:01:13 GMT -5
Here is my question. Got power go to the coil no spark. Tried diff coil no spark. I have power going to the coil coil to the distributor negative going to the distributor I don't use resistors never had to what am doing wrong any help
|
|
|
Post by martin113 on Jun 9, 2016 23:09:12 GMT -5
On a 5.9 magnum could I use a older style flex plate and 727 tranny
|
|
|
Post by martin113 on May 22, 2016 22:58:45 GMT -5
Do you make tranny bracket for cable shifter for 727 trannies
|
|
|
Post by martin113 on May 19, 2016 0:11:07 GMT -5
I'm building a 5.9 magnum have heard the balancing is different. So what will I need to use a 727 with it?
|
|