IMP
Heat Winner
Posts: 324
|
Post by IMP on Aug 12, 2011 15:04:07 GMT -5
post all your tips/tricks/info/questions on 1977 and newer gm sedans....also will edit to put all the 77 and newer gm sedans on here so help me out with all of them
|
|
|
Post by fewkes68f on Aug 12, 2011 17:47:59 GMT -5
hardnose, tuck, notch, hump plate or leaf if rules allow, 80's and newer gms like metrics and bubbles ive seen both pitched with good results....
|
|
|
Post by evan57 on Aug 13, 2011 13:52:01 GMT -5
do you have any tips for bubble caprice back end?
|
|
|
Post by fewkes68f on Aug 13, 2011 14:07:14 GMT -5
not really much you can do really the sheet metal on those aren't very good tuck it and make sure its gonna pack good and hard
|
|
|
Post by impala26 on Aug 14, 2011 10:33:41 GMT -5
just picked a 82 caprice up. the frame is thin in front of back wheel. if i tuck and notch the shit out of it should i be ok.
|
|
|
Post by cottonpickin11 on Aug 14, 2011 10:46:33 GMT -5
i did one dimple like 12-14inches back from the bumper brackets on the bubbles and v tucked the shit out of it and it rolled perfect, not tuck or notch
|
|
|
Post by rhull1977 on Aug 27, 2011 22:28:57 GMT -5
how are the 2 door versions of these cars? I have a couple of these and am having a hard time putting the dash bar and bar behind the seat in. Only allowed 6x6 plates so both bars are just welded to the door, or should I move the bar behind the seat further back? Thanks for any help
|
|
|
Post by jonesmotorsports on Aug 31, 2011 12:33:30 GMT -5
|
|
|
Post by camoboy on Sept 16, 2011 20:01:09 GMT -5
what did you do to the fame? does it help? sorry if the questions are stupid but i haven't started to build my first car yet
|
|
|
Post by alien21 on Sept 19, 2011 22:47:11 GMT -5
what does pitch it mean and how do you accomplish this?
|
|
|
Post by willoughby78 on Sept 20, 2011 0:25:51 GMT -5
what did you do to the fame? does it help? sorry if the questions are stupid but i haven't started to build my first car yet He's creased the humps, it helps strengthen them and they won't blow out AS fast, next best thing compared to hump plates
|
|
|
Post by camoboy on Sept 21, 2011 8:21:09 GMT -5
so creasing the humps and using hump plates would be the best thing to do right?
|
|
|
Post by fullyloaded on Oct 18, 2011 20:04:04 GMT -5
is this pinning the frame ? lol sorry i couldnt resist
|
|
|
Post by Baggernation 54 on Oct 19, 2011 20:18:22 GMT -5
could u crease the whole frame and make it stronger like he did with humps... j.w. if any ones done this with good results... and ya i know it was prolly a stupid question
|
|
|
Post by driver26k on Oct 19, 2011 21:48:47 GMT -5
is this pinning the frame ? lol sorry i couldnt resist no sir...pinning is a whole diffrent game and most times caught and you have to heat your frame up by cutting them out or you dont run...my opinion if you have to question if your gonna pass or not dont do it....but then again im a straight shooter
|
|