Landshark007
Feature Winner
I'm not here to win I'm here to make sure you don't win
Posts: 4,228
|
Post by Landshark007 on May 1, 2018 12:46:06 GMT -5
It looks good wish it was mine
|
|
|
|
Post by STROMI 121 on May 1, 2018 15:12:56 GMT -5
I start with doghouse and doors I don't like to walk around nothing or climb over anything I do the same thing so I don't have to open and close the doors a hundred times in my small garage. |
|
|
|
Post by DerbyKing88s on May 1, 2018 21:47:59 GMT -5
Didn’t think of pulling the bolts on the underside, good advice for the next one we strip, usually we take the clip off but idk why we didn’t. As far as doors we will eventually pull them off to our cage and stuff in but we r going to pull body first.
|
|
|
|
Post by cheezwhiz31 on May 3, 2018 13:49:56 GMT -5
mid 70's t-bird spindles work and give ya height. Ran them before
|
|
|
|
Post by DerbyKing88s on May 3, 2018 16:21:37 GMT -5
Ok good to know thank you. I might get some so I don’t have to deal with the cone.
|
|
|
|
Post by STROMI 121 on May 3, 2018 19:48:03 GMT -5
News to me but if cheese says it works. Then it does.
|
|
|
|
Post by DerbyKing88s on May 3, 2018 20:28:14 GMT -5
I’ll test it out I guess. Never hurts to try
|
|
|
|
Post by DerbyKing88s on May 3, 2018 20:32:55 GMT -5
Anyone have a spare set? Lol
|
|
|
|
Post by redneckracing12 on May 3, 2018 22:42:58 GMT -5
Box vic also works. If you flip flop sides.
|
|
|
|
Post by DerbyKing88s on May 3, 2018 22:57:12 GMT -5
Oh really? That would be a little easier to find, it will raise car and everything would bolt up fine?
|
|
|
|
Post by DerbyKing88s on May 9, 2018 23:47:11 GMT -5
|
|
|
|
Post by DerbyKing88s on May 10, 2018 22:54:14 GMT -5
We got everything cleaned out of the engine compartment and the bumper ends off, no need for pics
|
|
|
|
Post by DerbyKing88s on May 12, 2018 0:14:04 GMT -5
We fixed the junk trailer today but scored some free 70’s ford uppers and spindles  |
|
|
|
Post by DerbyKing88s on May 12, 2018 12:31:55 GMT -5
Lol what do you mean?? 4 point with rectangle tube, 28 inch gtp tight to package trey, 2 down bars to the frame 10 inches behind the firewall, 2 down bars in the middle of the doors to sheet metal for protection, middle bar for shifter, halo. Lol a cage is a cage. Only different thing I’m going to do is instead of making my dash bar strait across it is going to be this shape —-\___/—- so the distributer has room when the car bends.
|
|
|
|
Post by DerbyKing88s on May 12, 2018 12:50:07 GMT -5
|
|
