can you add this for 2019 thanks
03&up
2003 and up will follow all the rules listed here and all rules listed below as well.
You have 2 options
option 1
-You can weld in a cradle from a 79-02 vic, marquis, etc. with the same configuration that it came with from the factory onto your 2003 & up frame. MAX weld bead is 3/8" wide and no added metal.
-The cradle and suspension components must be welded within 2" of factory location. *measure from crush box bolt holes forward on both models.
-You may tilt them in one location only
-you may have a factory spring pocket welded on the frame for your ball joint protector or a piece of square tube like listed above. (Spring pocket section CAN NOT BE WIDER THAN A-ARM)
-NO shortening the frame on 2003 & up
-NO filling the crush point holes
Option 2
- you may run a bolt in style cradle
- the cradle must not add any strength to the front frame beyond what the factory 79-02 cradle would in factory configuration.
-No welding on the frame to cradle at all
-utilize the factory bolting locations
-cradle and all suspension components must mount within 2" of factory location
-NO shortening the frame on 2003 & up
-NO filling the crush point holes