ynotracing
Feature Winner
Need time to work on my 74 LAC damnit
Posts: 3,629
|
Post by ynotracing on Mar 21, 2014 15:28:29 GMT -5
cheater!! lol
|
|
|
Post by STROMI 121 on Mar 21, 2014 15:32:14 GMT -5
that's porta-cheater...
|
|
|
Post by crownbros on Mar 23, 2014 11:04:59 GMT -5
Just curious: Does Duke Energy send you a thank you card along with a dozen roses at the end of every fiscal year?
|
|
|
Post by jackedup on Mar 27, 2014 22:46:16 GMT -5
Make sure you guys are pushing against the PP or cradle when you do this. I heard horror stories last year after someone was pushing on the crank bolt.
|
|
|
Post by 262markm on Mar 27, 2014 23:41:43 GMT -5
Make sure you guys are pushing against the PP or cradle when you do this. I heard horror stories last year after someone was pushing on the crank bolt. You can't fix stupid
|
|
|
Post by cheezwhiz31 on Mar 28, 2014 7:53:35 GMT -5
Soooo you just weld that in there then when your done and that keeps the front bumper from bending in the middle. Do you leave the pump hooked up so if the frame pushes back during the heat you can try and push it back out??!??
|
|
|
Post by hitman23 on Mar 28, 2014 8:31:48 GMT -5
yes and then paint it black to match the frame
|
|
|
Post by STROMI 121 on Mar 28, 2014 8:58:48 GMT -5
The ram has a quick connect.
|
|
|
Post by JoJo Davis on Mar 28, 2014 9:30:21 GMT -5
Stromboli, I listen too!!!
|
|
cw09
Heat Winner
Posts: 528
|
Post by cw09 on Mar 28, 2014 18:27:04 GMT -5
Bottle jack would do the same or even a floor jack.
|
|
|
Post by Crownvic891 on Mar 28, 2014 20:02:45 GMT -5
Make sure you guys are pushing against the PP or cradle when you do this. I heard horror stories last year after someone was pushing on the crank bolt. So if your not allowed to run pp or cradle where would you suggest pushing at on the motor??
|
|
|
Post by jackedup on Mar 28, 2014 20:08:40 GMT -5
If your not allowed a pulley protector or cradle I'm guessing you cant run a DP, mid plate, or trans brace so there really isn't any good reason to be pushing your engine back I can think of. If you had to push it back for whatever other reason I would push on the block with a piece of wood.
|
|
ynotracing
Feature Winner
Need time to work on my 74 LAC damnit
Posts: 3,629
|
Post by ynotracing on Mar 28, 2014 20:16:23 GMT -5
The reason you jam it all back is to help brace the front end. If you have no protectors it would cause more problems for ya
|
|
|
Post by spiderman21 on Mar 28, 2014 20:22:17 GMT -5
The reason you jam it all back is to help brace the front end. If you have no protectors it would cause more problems for ya just a busted trans.. no biggie.. lol
|
|
ynotracing
Feature Winner
Need time to work on my 74 LAC damnit
Posts: 3,629
|
Post by ynotracing on Mar 28, 2014 21:10:50 GMT -5
Then your a spectator lol
|
|