|
Post by fig714 on Jun 1, 2014 19:55:56 GMT -5
what lower radiator hose do i get that doesn't have the 3rd hose on it so i can eliminate the radiator reservoir tank for the 3100? i do plan on getting an inline filler neck for the top radiator hose so i can put water in it.
|
|
jimx29
Heat Winner
Hoochie Daddy
Posts: 345
|
Post by jimx29 on Jul 13, 2014 4:30:03 GMT -5
Got a 96 grand am with the 2.4 The motor has the plastic intake manifold that looks very vulnerable on the front side of the motor. Anyone have any ideas on how to protect it at all?
Also, when stripping it down, I got to taking out the armrest/counsel, and after effing around trying to bypass the shift lock setup the motor now doesn't run. It will turn over and pop-off for about a second, but won't stay running. Any ideas on what wire(s) I may have snipped, or something else in that area that would be causing this problem?
thanks... Jim
|
|
|
Post by staudt83 on Jul 13, 2014 14:11:44 GMT -5
Fuel pump is relay wires are located there
|
|
jimx29
Heat Winner
Hoochie Daddy
Posts: 345
|
Post by jimx29 on Jul 13, 2014 14:24:21 GMT -5
Fuel pump is relay wires are located there Any pics? Which wires/color of wires? I've looked up and down at what is routed there, and i'm not seeing anything that is unplugged and/or snipped in that area
|
|
jimx29
Heat Winner
Hoochie Daddy
Posts: 345
|
Post by jimx29 on Jul 13, 2014 20:52:38 GMT -5
Fuel pump is relay wires are located there Any pics? Which wires/color of wires? I've looked up and down at what is routed there, and i'm not seeing anything that is unplugged and/or snipped in that area I've also hardwired the fuel pump and it's sending good psi to the motor.
|
|
|
Post by staudt83 on Jul 16, 2014 20:36:43 GMT -5
Have a 95 corsica rules say I can run any bumper or take bumperskin and stuff with whatever I want What's best bumper for these dint want to much weight that I destroy front frame rails
|
|
olsen15
Feature Winner
Posts: 1,236
|
Post by olsen15 on Jul 16, 2014 22:30:10 GMT -5
Have a 95 corsica rules say I can run any bumper or take bumperskin and stuff with whatever I want What's best bumper for these dint want to much weight that I destroy front frame rails Vic bumper
|
|
|
Post by staudt83 on Jul 17, 2014 5:47:32 GMT -5
Found 74 pontiac bonneville bumper any good?
|
|
|
Post by killzc495 on Jul 17, 2014 16:01:39 GMT -5
Running a 1990 Beretta its fresh any tipsor tricks I should know??? Has a 3.1 Iin it... clean car want to make it hard... thanks
|
|
|
Post by muddevil01 on Jul 20, 2014 17:44:02 GMT -5
I just picked up a '90 beretta with a 2.2 5 speed it won't start unless I pour gas into the throttle body does anyone know where the fuel pump relay located and what pressure is the pump in case I have to replace it thanks
|
|
|
Post by janssen23x on Jul 21, 2014 22:07:16 GMT -5
I have a Beretta and it ran last year and I am trying to get it started again now and I'm not getting spark I can only find the fuse box that is bye the drivers door...shouldn't there be another one under the hood?
|
|
|
Post by runinoutofgas on Jul 21, 2014 22:21:45 GMT -5
I have a Beretta and it ran last year and I am trying to get it started again now and I'm not getting spark I can only find the fuse box that is bye the drivers door...shouldn't there be another one under the hood? there is one under the hood, also a couple fusable links as well.
|
|
|
Post by janssen23x on Jul 21, 2014 23:23:00 GMT -5
Where at under the hood I've looked everywhere I think lol
|
|
|
Post by muddevil01 on Jul 28, 2014 23:30:48 GMT -5
Anyone know how to bypass the clutch safety switch on a 90 Beretta 2.2 5speed thanks in advance
|
|
|
Post by taterjuice on Aug 5, 2014 17:48:33 GMT -5
Anyone know how to bypass the clutch safety switch on a 90 Beretta 2.2 5speed thanks in advance run a push button starter directly to the starter and go around all that safety bs.
|
|