|
Post by Junkyarddog84 on Jun 8, 2018 10:05:48 GMT -5
You can replace the grand am spindles with the steel spindles off a cavalier. Will require using the hub, caliper and rotor as well but changes the hub to the small bolt pattern Do the axles in the grand am fit inside the hubs and all or do the axles or hubs need to be modified?? And do the hubs assemblies and all just bolt right in place of the aluminum ones? Use the spindle, hub, rotor , brake caliper off the cavalier. Also the cavalier cv is needed for the cavalier hub as they are different from the grand am hub. Splines are different. Good luck
|
|
|
Post by thatwarriorboy on Jun 9, 2018 9:02:11 GMT -5
Do the axles in the grand am fit inside the hubs and all or do the axles or hubs need to be modified?? And do the hubs assemblies and all just bolt right in place of the aluminum ones? Use the spindle, hub, rotor , brake caliper off the cavalier. Also the cavalier cv is needed for the cavalier hub as they are different from the grand am hub. Splines are different. Good luck Is there any specific year cavalier that’s better to use??
|
|
|
Post by Junkyarddog84 on Jun 9, 2018 12:17:37 GMT -5
Use the spindle, hub, rotor , brake caliper off the cavalier. Also the cavalier cv is needed for the cavalier hub as they are different from the grand am hub. Splines are different. Good luck Is there any specific year cavalier that’s better to use?? Im not quite sure on if diff yrs are better than one another but I did use the parts from a 99 cavi
|
|
|
Post by daffy26 on Jun 10, 2018 8:11:15 GMT -5
Will early 90s grand am spindle fit a early 2000 grand am or will a Buick century spindle fit
|
|
|
Post by Junkyarddog84 on Jun 12, 2018 22:31:47 GMT -5
Will early 90s grand am spindle fit a early 2000 grand am or will a Buick century spindle fit I know the later yr cavi ones will work, not sure on the earlier gen ones. Would have to compare them, if they are close a little fabrication or modification should help..best of luck
|
|
|
Post by demolitiondriver79 on Jun 27, 2018 13:20:45 GMT -5
Any tips or tricks on a stock build 2000 grand am
|
|
|
Post by smashbob12 on Jun 27, 2018 20:47:53 GMT -5
Any tips or tricks on a stock build 2000 grand am Hope you can change the front bumper !!!!! That's #1 on the list !!!
|
|
|
Post by stellis124 on Jun 28, 2018 7:56:17 GMT -5
Any tips or tricks on a stock build 2000 grand am #2 is take off rear bumper and notch the rear and bend it up. or youll be a farm machine plowing dirt.
|
|
|
Post by 721flatrock on Jul 29, 2018 21:11:51 GMT -5
hey guys have 93 grand am w 2.3 do these have security a friend has one pulled dash it cranks but cant get fire its a 2.3 quad 4 the damn derby is thurs
|
|
|
Post by hogwild on Aug 19, 2018 18:53:17 GMT -5
96 Corsica how to wire trans
|
|
|
Post by fallinskiestwice on Aug 20, 2018 8:17:29 GMT -5
Which trans?
|
|
|
Post by coachwagner on Aug 20, 2018 22:27:07 GMT -5
Built a corsica my 2cents. The trunk will push straight into the back seat. Need a gas tank protector or else it will give quick and belly. The trunk rails are strong but inside needs help
|
|
|
Post by 721flatrock on Aug 24, 2018 9:52:37 GMT -5
is the wire lay out on coils on a berretta 2.8 the same as lumina 3.1 u dont need big plug but need the 2 little plugs i moved coils inside didnt move harness extended the pink and black plug to reach now wont start
|
|
|
Post by stellis124 on Oct 12, 2018 13:33:45 GMT -5
Trying to load pic did you home make your header or did you purchase it? did it go on easy or was it a challenge?
|
|
|
Post by Junkyarddog84 on Oct 15, 2018 12:34:32 GMT -5
I fabbed mine up from scratch. Pretty dam heavy but worked out good.
|
|