|
Post by C4 on Dec 20, 2011 20:03:13 GMT -5
didn't get home til after dark. Try again tomorrow.
|
|
|
Post by benny1053 on Dec 20, 2011 20:12:24 GMT -5
no worries im building for a show august first... plenty of time haha
|
|
|
Post by C4 on Dec 21, 2011 13:30:31 GMT -5
Like I said, the damage qwas pretty much done before I chained these. I pulled the car back down to do it, so it could hang together for another run. Right through the hole where the shock used to be, and punch a hole right through the wheel well above the frame rail. You can see where there is a factory reinforced plate where the shocks were. If you don't have access to a tractor bucket, or something to push the back of the car down, it will take a series of long bolts to get it sucked down.
|
|
|
Post by C4 on Dec 21, 2011 13:33:46 GMT -5
And maximize your leaf pack rules.
|
|
|
Post by benny1053 on Dec 21, 2011 20:20:14 GMT -5
did you take the shocks out?
|
|
|
Post by benny1053 on Dec 21, 2011 20:21:25 GMT -5
and that makes you stronger ? or just a more solid back end?
|
|
|
Post by C4 on Dec 21, 2011 22:13:58 GMT -5
With the chains in place, the shocks are kind of a moot point.
|
|
Fear27
Heat Winner
you build it ill bend it
Posts: 221
|
Post by Fear27 on Dec 29, 2011 19:49:48 GMT -5
Nobody knows if a pinto leaf pack will bolt under a gremlin do they? (: Measure the main leaf and tell me how long it is. Then I'll measure the stock leafs I got on the two gremlins I got. pretty sure when my buddy measured it the shackle holes were around 48in apart measuring around the length not a strait line..
|
|
|
Post by benny1053 on Jan 6, 2012 0:03:43 GMT -5
Can i make it a tank? Attachments:
|
|
|
Post by hellbent09 on Jan 6, 2012 5:57:03 GMT -5
|
|
|
Post by benny1053 on Jan 7, 2012 15:11:55 GMT -5
Anyone ever put a frame underneath one of these?
|
|
kmo
Future Icon
Posts: 9
|
Post by kmo on Jan 8, 2012 23:24:29 GMT -5
I need some help. i got a 75 gremlin out of a junk yard with all the wires cut from the car and need to know if anyone has any wiring diagrams or a way to wire it. stock motor and everything.
|
|
|
Post by C4 on Jan 9, 2012 0:35:30 GMT -5
If it is a 6 cylinder or V8, it will wire up like a Ford, as they used Ford ignition systems. See the 2.3 Diagram in the thread locator at the top of the compact page. If it is the Audi 2.0 four banger.....don't know what to tell ya.
Welcome aboard.
|
|
kmo
Future Icon
Posts: 9
|
Post by kmo on Jan 9, 2012 22:20:59 GMT -5
its an in line 6 cylinder. they any good or should i drop a different motor in it? got keep it fairly stock for our rules
|
|
|
Post by C4 on Jan 9, 2012 22:53:46 GMT -5
Most on here disagree. Personally, I love the 258's. Not a fan of the 232.
|
|