|
Post by durtyd16 on Feb 24, 2016 2:39:22 GMT -5
Yea Sadly only have the rear taillight
|
|
|
Post by fillthyanimal75 on May 18, 2016 18:59:59 GMT -5
How do pacers hold up in chain and go compact class?
|
|
|
Post by C4 on May 18, 2016 19:41:52 GMT -5
How do pacers hold up in chain and go compact class? Pretty good if you can keep the front bumper on and keep the back wheels from getting hit. Swap the rear if possible...axles are far from ideal for derby.
|
|
|
Post by fillthyanimal75 on May 19, 2016 1:11:49 GMT -5
What kind rear ends will fit?
|
|
|
Post by C4 on May 19, 2016 9:21:41 GMT -5
That's kind of a loaded question. There isn't much out there that has weaker axles than its factory Dana 20 or 35. Anything that's wide enough will work. You'll probably have to make, move, or modify spring perches.
|
|
|
Post by puttzer on May 19, 2016 10:30:09 GMT -5
What kind rear ends will fit? 8 3/4 From a Chrysler New Yorker is a direct swap.
|
|
|
Post by cc0913 on Aug 7, 2016 23:58:03 GMT -5
What are you guys doing to keep the front subs from pulling out of under these or getting shoved back without using kickers. I ran 3 5/8 bolts on each side and it's still wanting to do it
|
|
|
Post by durtyd16 on Aug 15, 2016 23:08:29 GMT -5
I'm going to shorten the front a bit and run all thread through the sub with plates should suck up the sub.
|
|
|
Post by mcw731 on Feb 23, 2017 9:56:46 GMT -5
Will a 14 bolt FF rear end out of a 2000 Chevy one ton fit or be to wide?
|
|
|
Post by mcw731 on Oct 1, 2017 21:14:23 GMT -5
.
|
|
|
Post by willyutne on Oct 4, 2017 12:00:42 GMT -5
Hey guys I got a question for you! What steering rack fits in a 1975 pacer? Thanks
|
|
|
Post by C4 on Oct 4, 2017 12:17:28 GMT -5
Hey guys I got a question for you! What steering rack fits in a 1975 pacer? Thanks Direct interchange is 75-77 Pacer, period. A reman is about $150 at Napa plus $25 core. Looking at the 2, side by side a few years ago, I got the idea that a fox body rack would go in without an extreme amount of fab work.
|
|
|
Post by willyutne on Oct 4, 2017 13:53:50 GMT -5
Mustang will mount up??
|
|
|
Post by C4 on Oct 4, 2017 14:52:50 GMT -5
Not gonna just bolt up, but could made to fit with some mild mods. Was several years ago that I was making the comparison, so if you test my memory, it will fail.
|
|
|
Post by willyutne on Oct 6, 2017 8:31:22 GMT -5
Ok sweet! I have a 2.3 wondering what gears to put in it?
|
|