demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Mar 15, 2019 21:03:47 GMT -5
Goal is to always stay moving if a tire shot comes give the the door or them nice overpriced 14 bolts.
Sounds like few months we will find out how this set up works. The chamber worked for us on ours but ours was stock parts so as it got hit it just straightened up the tire so it wouldn't start laying in hard as it bent.
|
|
|
Post by NoDakSmack on Mar 15, 2019 21:39:23 GMT -5
I'm just thinking outloud, but since the wheels are tipped out and the top of the spindle is against the frame, it makes me wonder when taking a wheel shot if it will potentially increase stress on the lower ball joints and/or lower A arms. I think it would be hard on rim at the top if nothing behind it has any give.. Full centers on them?
|
|
|
Post by smashford on Mar 15, 2019 22:08:43 GMT -5
My spindle ride on the frame and I bend a few lowers my stuffs much weaker than 88s, but mines not tipped like thag
|
|
|
Post by DerbyKing88s on Mar 15, 2019 22:14:57 GMT -5
So I could see potential more stress on the lower ball joints or a arms but top of the spindle is tight to the frame, lowers are plated and it’s the best balljoints we can run. Will have chain from spindle to frame and to the lower Incase one was to break, rims have full centers yes.
|
|
|
Post by smashincwa on Mar 16, 2019 15:45:49 GMT -5
With that degree of positive camber, the tire will roll under and pull off the bead, flatten the tire, and the rim digs in. Much more likely to roll the car as seen at Blizzard Bash.
|
|
|
Post by DerbyKing88s on Mar 16, 2019 17:10:04 GMT -5
Will have super sidewalls on 5 inch wide ss rims
|
|
|
Post by Rookie35 on Mar 25, 2019 22:15:28 GMT -5
What is everyone’s opinion on one of these for a bone stock that allows you to weld your front bumper on decent but rest is pretty stock? Curious for some opinions.
|
|
|
Post by DerbyKing88s on Mar 25, 2019 22:20:01 GMT -5
Can be decent, bash for cash bone stock is a good example. They will roll up at the first bend in the front horn where the brace runs across if you don’t show them some love
|
|
|
Post by dean88 on Mar 25, 2019 23:21:17 GMT -5
The 5/6 Caddys are all I run in stock shows
|
|
|
Post by DerbyKing88s on Mar 26, 2019 0:19:59 GMT -5
Deen would be the one to talk to for “stock” built caddies
|
|
|
Post by dean88 on Apr 4, 2019 20:06:14 GMT -5
Who are you asking that to?
|
|
|
Post by smashincwa on Apr 4, 2019 20:22:22 GMT -5
Not really, definitely not redoing the springs that’s for sure. That’s something we talked about in the future but we’ll see how it plays out. Running out of time. did this run yet?
|
|
|
Post by DerbyKing88s on Apr 4, 2019 20:26:06 GMT -5
April 26th and 27th
|
|
|
Post by smashford on Apr 14, 2019 13:06:39 GMT -5
They're fabricated, stated in previous post
|
|
|
Post by DerbyKing88s on Apr 14, 2019 18:16:21 GMT -5
They're fabricated, stated in previous post what
|
|