|
|
Post by goines2 on Aug 28, 2012 0:10:35 GMT -5
A pointy just looks "right" on a 70s cadillac!
|
|
|
|
Post by STROMI 121 on Aug 28, 2012 7:21:52 GMT -5
got to be forward dump headers Yup, elliotmotorsports. |
|
jp21
Future Icon
Posts: 11
|
Post by jp21 on Sept 16, 2012 21:35:43 GMT -5
IMG]http://pic100.picturetrail.com:80/VOL1025/12851758/23404976/403957253.jpg[/IMG]
73
|
|
Fousek49
Heat Winner
Josh Fousek
Posts: 151
|
Post by Fousek49 on Sept 16, 2012 22:51:21 GMT -5
 73 Fixed it so pic would show up for you. |
|
|
|
Post by jeff00262 on Oct 8, 2012 20:54:40 GMT -5
73 in 2009 Attachments:
|
|
|
|
Post by jeff00262 on Oct 8, 2012 20:55:28 GMT -5
73 in 2012 thing was a tank Attachments:
|
|
|
|
Post by cardwell22 on Oct 28, 2012 21:34:52 GMT -5
You would know... ;D I wish this one i built was just as hard! It may not of been as hard as the 73, but it got the job done. And yes, I took some good licks from it  i had a blast running again it but screwed up my knee hitting it head on in the middle of the track full throttle ;D  |
|
|
|
Post by STROMI 121 on Dec 1, 2012 13:10:14 GMT -5
|
|
|
|
Post by derbydriver666 on Dec 1, 2012 19:09:08 GMT -5
yore not the only one that has 2 bodies off the frame already Jimmy lol |
|
|
|
Post by STROMI 121 on Dec 2, 2012 10:10:50 GMT -5
Jimmy, you're not the only one that has 2 bodies off the frame already. lol Just getting started there Nate. Still lots of work to do. |
|
|
|
Post by 0cents on Dec 13, 2012 10:56:37 GMT -5
stromi how tall were your front tires on the front of that 74 you ran
|
|
|
|
Post by STROMI 121 on Dec 13, 2012 12:33:51 GMT -5
700-15 29x8x15s industrial mining 12 ply
|
|
|
|
Post by 0cents on Dec 13, 2012 13:14:15 GMT -5
ok, that is the same size i was going to use, i agree by your pics, that size tire, a arms welded down down looks like enough height for front
|
|
|
|
Post by STROMI 121 on Dec 13, 2012 13:18:42 GMT -5
Pull the stops and weld the upper where it touches with the car jacked up. Then beat the other side down until it touches and weld. Then plug weld where the bump stop was. JMO
|
|
|
|
Post by troytagvtown on Dec 13, 2012 21:24:48 GMT -5
Pull the stops and weld the upper where it touches with the car jacked up. Then beat the other side down until it touches and weld. Then plug weld where the bump stop was. JMO That's sound advise right there... Thank you |
|
