|
|
Post by 0cents on Aug 3, 2012 9:30:28 GMT -5
i think chevy a arms and spindles get you more height also
|
|
Rehse17x
Heat Winner
"Here 4 U 2 Hate"
Posts: 518
|
Post by Rehse17x on Aug 10, 2012 22:34:29 GMT -5
|
|
|
|
Post by STROMI 121 on Aug 24, 2012 19:09:41 GMT -5
|
|
|
|
Post by STROMI 121 on Aug 24, 2012 19:11:54 GMT -5
 Before run #2 |
|
Tank
Heat Winner
Posts: 555
|
Post by Tank on Aug 25, 2012 10:16:58 GMT -5
Welded upper a arms to frame and ran tall front tires. Plenty of ride/bumper height IMO Was that hard nosed? |
|
Tank
Heat Winner
Posts: 555
|
Post by Tank on Aug 25, 2012 10:18:06 GMT -5
I didn't think '73's had the quarter window like that.... Just 4's, 5's, and 6's?  Your right. |
|
mmac
Future Icon
Posts: 42
|
Post by mmac on Aug 26, 2012 12:30:43 GMT -5
After two derby's it's done. Doesn't show in the photo, but front suspension bent to hell and the rear passenger side frame is pushed up against the axle. Front tires don't want to roll.   |
|
|
|
Post by bert86 on Aug 26, 2012 15:40:33 GMT -5
|
|
|
|
Post by drivingbigtoys on Aug 27, 2012 17:19:58 GMT -5
|
|
|
|
Post by larson20 on Aug 27, 2012 18:44:42 GMT -5
That was one hard caddy
|
|
|
|
Post by drivingbigtoys on Aug 27, 2012 19:00:52 GMT -5
You would know... ;D I wish this one i built was just as hard! |
|
|
|
Post by larson20 on Aug 27, 2012 19:30:13 GMT -5
You would know... ;D I wish this one i built was just as hard! It may not of been as hard as the 73, but it got the job done. And yes, I took some good licks from it  |
|
|
|
Post by STROMI 121 on Aug 27, 2012 20:12:03 GMT -5
Welded upper a arms to frame and ran tall front tires. Plenty of ride/bumper height IMO Was that hard nosed? I used Ford bumper shocks to hardnose it.  |
|
|
|
Post by STROMI 121 on Aug 27, 2012 20:35:25 GMT -5
|
|
snake
Heat Winner
Posts: 368
|
Post by snake on Aug 27, 2012 23:49:44 GMT -5
got to be forward dump headers
|
|
