|
Post by md2469 on Jul 11, 2014 1:18:12 GMT -5
|
|
|
Post by md2469 on Jul 11, 2014 1:21:05 GMT -5
Still ran after a chain and go heat and a main with mostly welded cars on pavement.
|
|
ONETON
Heat Winner
ONE TON DERBY CREW
Posts: 412
|
Post by ONETON on Jul 12, 2014 7:59:49 GMT -5
Completely stock 89 Lincoln Town car next time shorten that front frame and hard nose it and may not bend up that bad.
|
|
|
Post by md2469 on Jul 12, 2014 10:37:16 GMT -5
We couldn't hard nose or shorten the frame. The car had to be completely stock. 6 chains in the front and 6 in the back with two going to the bumpers.
|
|
|
Post by jugulator on Jul 12, 2014 12:04:29 GMT -5
We couldn't hard nose or shorten the frame. The car had to be completely stock. 6 chains in the front and 6 in the back with two going to the bumpers. next time put the chain in the middle of the hood,,so it doesn't tent,, it does nothing back near the hinge ,,
|
|
|
Post by md2469 on Jul 12, 2014 12:31:20 GMT -5
We didn't even think of putting it there's hard a good idea.
|
|
|
Post by crazycarl on Jul 17, 2014 19:54:48 GMT -5
Has anybody ever ran a bubble vic (95) in a wire class? Im a compact guy so dont bash me. Just a question....
|
|
|
Post by clong527 on Jul 18, 2014 18:32:42 GMT -5
Has anyone ran a 80s lincoln without notching or dimpling the rear if so how did it do?
|
|
|
Post by derbydriver666 on Jul 18, 2014 21:46:21 GMT -5
they don't bend right without doing something to them. It will either blow humps or whale tail.
|
|
|
Post by md2469 on Jul 18, 2014 22:55:32 GMT -5
I didn't notch or dimple my rear. My car was completely stock no modifications of any sort to the frame, bumpers, or engine. we did loop trans lines and things like that tho.
|
|
|
Post by fordpowerforever on Jul 21, 2014 17:16:41 GMT -5
Has anybody ever ran a bubble vic (95) in a wire class? Im a compact guy so dont bash me. Just a question.... here is a bubble for here is my buddys completely stock bubble ford, besides chevy drivetrain, all wire not even chain, won the chain and go class, threw it together in a couple days...
|
|
|
Post by dcornell20 on Jul 22, 2014 7:30:00 GMT -5
|
|
|
Post by dcornell20 on Jul 22, 2014 7:32:49 GMT -5
|
|
|
Post by dcornell20 on Jul 22, 2014 7:35:08 GMT -5
|
|
|
Post by dcornell20 on Jul 22, 2014 7:39:44 GMT -5
80s grand marquis chevy drive train the rest stock.. changed body bolts to 1/2 inch only aloud stock spacers, weld bumpers on 4 bar cage and 2 3x3 plates on each door seam... notched rear onces and sliced top frame on second in between 2 rear body mounts.. went in nice on the back besides kicked to the drivers side as you can see... a motor mount came free and engine kicked to the side breaking dist cap.. believe 9/10 cars in the heat all 80s and newer
|
|