|
Post by pasterofmuppets on Dec 30, 2014 23:00:23 GMT -5
Yeah, 1" bolts and 1" thick 3" width spacers. I've got it built low as of now.
|
|
|
Post by STROMI 121 on Dec 30, 2014 23:12:02 GMT -5
Are you allowed a GTP?
|
|
|
Post by pasterofmuppets on Dec 31, 2014 0:56:52 GMT -5
Yeah, 24" width max at the package tray, bolted with two 1" bolts. Technically no package tray, just the rearend sump, but you get the idea.
|
|
|
Post by orangecrush79 on Dec 31, 2014 14:24:42 GMT -5
6x14's
|
|
|
Post by bholt07 on Jan 1, 2015 13:28:50 GMT -5
Is everyone using a stock or stock style bushings or making all steel bushings? First time working with leaf springs.
|
|
|
Post by Comet Cyclone on Mar 25, 2015 9:16:12 GMT -5
Are /2 bolts for the shackle bushings ample enough
|
|
|
Post by twisted66 on Apr 29, 2015 23:39:19 GMT -5
|
|
88x
Heat Winner
Posts: 247
|
Post by 88x on Apr 30, 2015 10:29:07 GMT -5
^^^You sir do very nice work^^^
|
|
|
Post by redneckracing12 on Apr 30, 2015 11:05:58 GMT -5
^^^You sir do very nice work^^^ X2 on that!
|
|
|
Post by seventyonehemicuda on Apr 30, 2015 22:52:21 GMT -5
That takes flat stack to a whole new level. every stack i've put together is a joke in comparison to that. I NEED after pics of your cars. I Bow down to you sir! EXTREMELY nice work! well done!
|
|
|
Post by twisted66 on May 1, 2015 13:17:10 GMT -5
Thanks guys. I always try to do the nicest job I can.
|
|
|
Post by shr283r on May 9, 2015 10:28:19 GMT -5
How hard is it to drill and bolt these in a similar way. I would think they would chew drill bits up.
|
|
|
Post by blackmopar21 on May 10, 2015 15:21:28 GMT -5
I redrilled a set one year for my center pin. I special bit from the coal mine, and half a day later I had two holes drilled.
|
|
|
Post by seventyonehemicuda on May 10, 2015 20:00:04 GMT -5
How hard is it to drill and bolt these in a similar way. I would think they would chew drill bits up. like anything use a good sharp bit, turn it slow, keep it oiled and cool. if you put the drill in high gear and melt the tip of the bit then yeah its gonna take forever. I've re-drilled many springs for a larger center pins with no problems whatsoever.
|
|
|
Post by derbyn00b on Aug 14, 2015 14:39:14 GMT -5
I just flipped through all the pages, don't see much on short leafing, anyone have some pics on how to and installed after completion ?
|
|