|
Post by danderbyfan on Sept 15, 2016 16:08:38 GMT -5
Who wants to build a 2003 Pontiac Montana van? (like Chevy Venture) Runs good, $250. Turn key drivetrain, but has bent control arm. Located in St. Louis.
|
|
|
Post by kentstang on Sept 22, 2016 15:28:02 GMT -5
How well do you think a 95 aerostar would hold up in a gut and go fwd class. Probably be the only van. Iam torn between trying a van or picking up a 00Malibu or 94 cutlass ciera
|
|
|
Post by martin113 on Sept 24, 2016 14:13:13 GMT -5
If I get a TBI to carb adapter can I get rid off all the wiring crap like computer and fuse block?
|
|
|
Post by yamahaboy125 on Mar 19, 2017 22:43:03 GMT -5
Hey all, I'm building my first van for a demo. It's a 1988 Chrysler Caravan, any thing I should be worried about breaking? I'm not new to demoing, just new to vans. We are building to limited weld rules so any help is appreciated!
|
|
|
Post by fallinskiestwice on Mar 20, 2017 6:12:10 GMT -5
Hey all, I'm building my first van for a demo. It's a 1988 Chrysler Caravan, any thing I should be worried about breaking? I'm not new to demoing, just new to vans. We are building to limited weld rules so any help is appreciated! Front struts/spindles are made of glass
|
|
|
Post by yamahaboy125 on Mar 20, 2017 19:41:56 GMT -5
Hey all, I'm building my first van for a demo. It's a 1988 Chrysler Caravan, any thing I should be worried about breaking? I'm not new to demoing, just new to vans. We are building to limited weld rules so any help is appreciated! Front struts/spindles are made of glass Any way to make them tougher?
|
|
|
Post by fallinskiestwice on Mar 21, 2017 5:37:05 GMT -5
Not sure haven't looked into it much. Avoid wheel shots you'll be fine
|
|
|
Post by yamahaboy125 on Mar 22, 2017 21:11:51 GMT -5
Lol, easier said than done, anything else you may know? Thanks in advance
|
|
|
Post by fallinskiestwice on Mar 23, 2017 12:22:10 GMT -5
Don't know much about em, we just run em bone stock around here.
|
|
|
Post by yamahaboy125 on Mar 23, 2017 19:31:17 GMT -5
Does the front end hold up? Got a built railroad that will probably be on it
|
|
|
Post by Teamsleven777 on Jun 3, 2017 9:58:43 GMT -5
Not much in the mini van section. I'm brand new to mini vans I've been running compacts for years. Around here it seems to be mostly caravans running a few Astros have been ran but always seem to be a big target because they are slow and get out manuvered by the fwds. I have several vans at my disposal including caravan gm fwd gm rwd Hondas nissan ford fwd ford rwd. Can swap to any car pumper. Thinking of running a gm fwd as they have pretty much the same front end and subframe as a w body. It will be getting an 80s ford bumpers any thoughts.
|
|
|
Post by totalobliviondemo on Jul 25, 2017 0:45:27 GMT -5
01 Pontiac Montana any good? Tips on moving gas tank? Never messed with efi before. 3400 v6 I ran a Pontiac Montana last year and would gladly run one of these vans again I love the way the rear folded. The floor of the van stayed put giving my a low hitting flatbed to damage suspension with. I wish I could got the front end just a bit higher cause I took one shot to the front with an illegally loaded bumper and it crushed my main fuse box which is the one weakness on the front. Had that blazer hit my front bumper I woulda probably got 2nd or 1st. I love the Pontiac Montana mini vans I've been searching for another I wana run one again.
|
|
|
Post by Nelsonracing86n on Aug 1, 2017 21:54:43 GMT -5
01 Pontiac Montana any good? Tips on moving gas tank? Never messed with efi before. 3400 v6 I ran a Pontiac Montana last year and would gladly run one of these vans again I love the way the rear folded. The floor of the van stayed put giving my a low hitting flatbed to damage suspension with. I wish I could got the front end just a bit higher cause I took one shot to the front with an illegally loaded bumper and it crushed my main fuse box which is the one weakness on the front. Had that blazer hit my front bumper I woulda probably got 2nd or 1st. I love the Pontiac Montana mini vans I've been searching for another I wana run one again. I just got one this will be me second van
|
|
|
Post by totalobliviondemo on Aug 1, 2017 22:13:00 GMT -5
Pontiac Montana's are tough. I just wish I coulda got my bumper a bit higher on the last one. If I get another I'll have to look into adjusting the bumper height to avoid what happen to me last year. Would love to run another Montana though but they cost a little more to buy than I would like.
|
|
|
Post by homer2 on Aug 6, 2017 23:05:15 GMT -5
Can you run a Dodge Caravan without a return line? I hooked up one of my tanks with just the feed line. It seems to run OK. Will it stay running, or will it eventually load up to much and quit?
What do you guys say. This is my first minivan.
Thanks
|
|