snake
Heat Winner
Posts: 368
|
Post by snake on Mar 13, 2021 19:42:20 GMT -5
|
|
snake
Heat Winner
Posts: 368
|
Post by snake on Jan 5, 2021 20:20:36 GMT -5
I have ran the oem rack too many times, only to have the rack explode every time . Dont run 03 unless you can bolt a oem box
|
|
snake
Heat Winner
Posts: 368
|
Big hit
Aug 9, 2020 14:37:34 GMT -5
429 likes this
Post by snake on Aug 9, 2020 14:37:34 GMT -5
Nice track hit hope he got more than one
|
|
snake
Heat Winner
Posts: 368
|
Post by snake on Jul 14, 2019 9:56:46 GMT -5
need a bumper
|
|
snake
Heat Winner
Posts: 368
|
Post by snake on Jun 24, 2019 22:03:54 GMT -5
79 ford cant seem to find diagram for plug , do I need to use the regulator
|
|
snake
Heat Winner
Posts: 368
|
Post by snake on Jun 15, 2019 19:08:36 GMT -5
any updates
|
|
snake
Heat Winner
Posts: 368
|
Post by snake on May 27, 2019 10:38:34 GMT -5
who sells it
|
|
snake
Heat Winner
Posts: 368
|
Post by snake on May 20, 2019 21:20:30 GMT -5
where's the light weld full size rules
|
|
snake
Heat Winner
Posts: 368
|
Post by snake on Mar 7, 2019 19:15:21 GMT -5
I have had the factory rack has ripped off its mounts 6 times already , not sure the real purpose of the ski inc knuckle is, also there are 3 steering sleeves on the stock column One of the weakest points , besides no way to protect upper ball joint from collapsing . old school steering box would solve a lot of issue's
|
|
snake
Heat Winner
Posts: 368
|
Post by snake on Jan 22, 2019 23:00:27 GMT -5
|
|
snake
Heat Winner
Posts: 368
|
Post by snake on Nov 21, 2018 22:03:13 GMT -5
I welded in 80 Vic cradle in a 08 frame installed steering box and where the steering shaft comes down right by the cradle is super close to touching frame which will make it hard to steer. If it bends same thing with a welded gm cradle tight spot with shaft I heated it and peened it down about an inch
|
|
snake
Heat Winner
Posts: 368
|
Post by snake on Oct 9, 2018 20:21:13 GMT -5
can you add this for 2019 thanks
03&up 2003 and up will follow all the rules listed here and all rules listed below as well. You have 2 options
option 1 -You can weld in a cradle from a 79-02 vic, marquis, etc. with the same configuration that it came with from the factory onto your 2003 & up frame. MAX weld bead is 3/8" wide and no added metal. -The cradle and suspension components must be welded within 2" of factory location. *measure from crush box bolt holes forward on both models. -You may tilt them in one location only
-you may have a factory spring pocket welded on the frame for your ball joint protector or a piece of square tube like listed above. (Spring pocket section CAN NOT BE WIDER THAN A-ARM)
-NO shortening the frame on 2003 & up -NO filling the crush point holes
Option 2 - you may run a bolt in style cradle - the cradle must not add any strength to the front frame beyond what the factory 79-02 cradle would in factory configuration. -No welding on the frame to cradle at all -utilize the factory bolting locations -cradle and all suspension components must mount within 2" of factory location -NO shortening the frame on 2003 & up -NO filling the crush point holes
|
|
snake
Heat Winner
Posts: 368
|
Post by snake on Sept 24, 2018 22:31:50 GMT -5
can just make your own
|
|
snake
Heat Winner
Posts: 368
|
Post by snake on Sept 13, 2018 19:58:42 GMT -5
|
|
snake
Heat Winner
Posts: 368
|
Post by snake on Jun 5, 2018 19:53:09 GMT -5
Stock ford mounts bolt right in at least two do is one way Chain block too the two bolts that come through frame No give, solid engine mounts, will crack that oem aluminum easy Modified class , sandwich cradle between frame and oem cradle , mounts from both sides through the 4 oem cradle bolts , not sold here
|
|