|
Post by kylescarberry on Dec 10, 2023 11:31:49 GMT -5
I’m putting together a 8.8 with 31 spline axles I’m using a 80s housing and and explorer carrier with the explorer axles I’m uses Dana 4:88 gears I’m having trouble setting the gears. With no shimms behind the pinion bearing the ring gear is extremely to tight I’m not sure how to go about this I’ve setup gears before just not with with taking two diffs and making one so if anyone has done this I would appreciate the help in explaining where I’m wrong at
|
|
|
Post by STROMI 121 on Jan 15, 2024 20:16:25 GMT -5
I don’t know. I’ve only ever seen it done with the stock 410 explorer gears. Im sure what you are saying is a thing. I just don’t know anything about that.
|
|
tude8
Future Icon
Posts: 101
|
Post by tude8 on Jan 15, 2024 21:23:16 GMT -5
I’m putting together a 8.8 with 31 spline axles I’m using a 80s housing and and explorer carrier with the explorer axles I’m uses Dana 4:88 gears I’m having trouble setting the gears. With no shimms behind the pinion bearing the ring gear is extremely to tight I’m not sure how to go about this I’ve setup gears before just not with with taking two diffs and making one so if anyone has done this I would appreciate the help in explaining where I’m wrong at i havent ever done it myself but you may compare the bearing and races to confirm one isnt bigger than the other on the outside diameter.
|
|