|
|
Post by Jshenkenberg on Jul 4, 2022 16:08:09 GMT -5
What is all needed to be done to build a th400 that will only have 1st and reverse gears
|
|
Landshark007
Feature Winner
I'm not here to win I'm here to make sure you don't win
Posts: 4,228
|
Post by Landshark007 on Jul 5, 2022 12:49:01 GMT -5
Just build a stop to keep it from going in to park. Turn the stop when you put it on the trailer and at home so you don’t run someone over
|
|
|
|
Post by Jshenkenberg on Jul 5, 2022 18:18:20 GMT -5
Do you have the kickdown switch hooked up?
|
|
Landshark007
Feature Winner
I'm not here to win I'm here to make sure you don't win
Posts: 4,228
|
Post by Landshark007 on Jul 6, 2022 7:43:46 GMT -5
I don’t think it matters but I don’t know. I never ran a kick down. I also don’t run a automatic very often.
|
|
|
|
Post by STROMI 121 on Jul 8, 2022 15:43:47 GMT -5
A stock 400 will automatically shift to second at a certain RPM. There are ways around it. I never cared. I’ve always ran them in stock form even if rebuilt. You can have them built to only have first and reverse. That requires a rebuild.
|
|
owen11x
Feature Winner
Ford makes it, Chevy shakes it, Mopar breaks it!
Posts: 2,585
|
Post by owen11x on Jul 8, 2022 17:37:26 GMT -5
I always wanted mine to hit 2nd especially when you couldnt get the skinny pedal shoved far enough through the firewall. And I ran 4.56 gears so 1st gear alone was to short for how big our tracks are around me. 2nd gear was needed
|
|
