|
Post by farrell11 on Jun 26, 2021 20:30:30 GMT -5
I recently purchased a used big rock cradle the water pump bolts through the cradle I was wondering what you guys are doing to space the harmonic balancer pulley out so the belts sit even I’m also using a shirt water pump set up
|
|
|
Post by cheezwhiz31 on Jun 28, 2021 8:43:27 GMT -5
cut a plate same thickness of your front plate and mark holes and drill. Otherwise i have aluminum spacers but not sure who builds them. Was a long time ago and i don't use anymore. How thick ya need? i could send you the one i have for 1/2 front plate i think have to check...
|
|
|
Post by farrell11 on Jun 28, 2021 18:40:53 GMT -5
cut a plate same thickness of your front plate and mark holes and drill. Otherwise i have aluminum spacers but not sure who builds them. Was a long time ago and i don't use anymore. How thick ya need? i could send you the one i have for 1/2 front plate i think have to check... Thanks man but I got it figured out called Nerat he had what I needed and got me squared away
|
|