|
Post by galaxie on Mar 13, 2020 15:27:58 GMT -5
You guys ever run these? Just wondering if they are any good
|
|
|
Post by smashford on Mar 13, 2020 16:57:03 GMT -5
Junk I can send my address for disposal
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Mar 13, 2020 16:59:16 GMT -5
You guys ever run these? Just wondering if they are any good Single or double hump. Every one likes double humps derby and street guys. We got a set we run very good head to spend extra on. Now single hump I know nothing about.
|
|
Landshark007
Feature Winner
I'm not here to win I'm here to make sure you don't win
Posts: 4,228
|
Post by Landshark007 on Mar 13, 2020 17:25:57 GMT -5
I have a couple power pack heads
|
|
|
Post by galaxie on Mar 13, 2020 17:40:55 GMT -5
Ok I can get a set of double humps for $150
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Mar 13, 2020 20:47:25 GMT -5
Ok I can get a set of double humps for $150 Good deal on them
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Mar 13, 2020 20:47:56 GMT -5
I have a couple power pack heads I no people looking sir! Holding out on me!
|
|
Landshark007
Feature Winner
I'm not here to win I'm here to make sure you don't win
Posts: 4,228
|
Post by Landshark007 on Mar 13, 2020 20:50:07 GMT -5
They can be yours
|
|
|
Post by smashbob12 on Mar 14, 2020 8:09:14 GMT -5
Some people get a little mixed up/confused by the humps. Various styles of humps over the years. Get the casting # The last 3 digits will tell you pretty much what you need to know !
|
|
Landshark007
Feature Winner
I'm not here to win I'm here to make sure you don't win
Posts: 4,228
|
Post by Landshark007 on Mar 14, 2020 10:25:31 GMT -5
Mđ« looks like this is good if they look like stairs are bad. is how I go by it
|
|
|
Post by jk33kydriver on Feb 23, 2021 2:24:58 GMT -5
Any one ever put a set of camel humps on stock 305 and what bout value shrouding ? If they got the 1.94 value thanks
|
|
|
Post by smashbob12 on Feb 23, 2021 6:01:35 GMT -5
Any one ever put a set of camel humps on stock 305 and what bout value shrouding ? If they got the 1.94 value thanks get an earlier style 461 head, They actually had a 57cc chamber compared to later with 64cc chamber. a little porting will help the flow and the 1.94'1.50 valves will be just right.
|
|
|
Post by jk33kydriver on Feb 23, 2021 11:06:24 GMT -5
They are the 461but they are the 62cc. Just wondering exactly how they would work it just going for a derby motor really donât need all that compression. And small can might make up the difference. Just didnât know with them being the bigger camber really how much of a difference it would make
|
|
|
Post by plumcrazy46 on Feb 24, 2021 8:16:10 GMT -5
I love my 461s. Ported polished milled with 2.02 1.60 valves 1.6 roller rockers, screw in studs, guide plates, On a .030 over destrocked 350. 307 crank, 2 valve relief kb flat tops,5.7 rods, .490 lift cam, high-rise single plain with 650 carb. Will spin 8500 rpm all night.
|
|
|
Post by jk33kydriver on Feb 24, 2021 21:08:26 GMT -5
These are just stock pulled off a 64 327 and now they are on the 305 lol fingers crossed. Just heard wonât work right so weâll see lol
|
|