|
|
Post by framebreaker315 on Mar 11, 2020 10:59:47 GMT -5
I'm running a ford 351m with an HEI distributor and cant get the engine to turn over with my push button. But if I bypass my starter solenoid it turns over just fine. Any suggestions on what might be wrong?
|
|
|
|
Post by smashford on Mar 11, 2020 20:16:24 GMT -5
Solenoid
|
|
|
|
Post by redneckracing12 on Mar 11, 2020 21:40:16 GMT -5
Is the solenoid grounded?
|
|
|
|
Post by framebreaker315 on Mar 12, 2020 10:48:48 GMT -5
That's what i originally thought also so I put a new solenoid in and still doesn't turn over. I'm just dumbfounded I guess
|
|
|
|
Post by smashford on Mar 12, 2020 13:43:06 GMT -5
Is the solenoid grounded? Wiring will be the issue then if new solenoid
|
|
|
|
Post by marshmallowcar on Mar 14, 2020 20:43:45 GMT -5
Ditch the solenoid and use a heavy duty push button.
|
|
|
|
Post by justforfun1973 on Mar 16, 2020 0:34:33 GMT -5
Try swapping the battery/ starter wires around on the solonoid. When we ran them fords years ago, there was a defective solonoid (brand new). Flipped wires and fired up.
|
|
|
|
Post by klicky96 on Mar 16, 2020 5:22:35 GMT -5
Ditch the solenoid and use a heavy duty push button. Never do this. Always run a solenoid. |
|
