cw09
Heat Winner
Posts: 528
|
Post by cw09 on May 20, 2018 7:31:17 GMT -5
How much actual strength does the firewall add to keep the front end down on an 80s ford? If you want to run extreme trans tunnel and firewall have to be gone. You can cold pitch
|
|
|
Post by DerbyKing88s on May 20, 2018 19:46:48 GMT -5
Imo the firewall without protectors doesn’t do a whole lot, i’d Use protectors and run a hd crossmember and see if you can’t get away with tying the window bars to the where you cut firewall out so the DP can hit that.
|
|
|
Post by bustedknuckle242 on May 21, 2018 11:02:44 GMT -5
Are the rules specific and say your dash bar has to be "x" number of inches from firewall or DP? Also trans tunnel has to be completely cut out or just slits cut down it?
|
|
|
Post by beefybuilt104 on May 21, 2018 12:06:00 GMT -5
If it's a wire class like by it is by us the firewall is useless because all it's gonna do is break the distributor cap, not allowed dp for wire class. So I cut the hole in firewall as big as I need to. And wire the firewall flaps to the a pillars.
|
|