|
|
Post by ejlove09 on May 22, 2018 13:43:36 GMT -5
Yep I figured it out. Took a couple try’s at it but it’s coming along now. Thanks for the help and tips on this by the way!
|
|
|
|
Post by ejlove09 on May 22, 2018 13:46:09 GMT -5
|
|
|
|
Post by ejlove09 on May 22, 2018 13:46:42 GMT -5
Even got the body on haha it’s coming along pretty smoothly now.
|
|
|
|
Post by STROMI 121 on May 22, 2018 14:15:53 GMT -5
Not familiar with that type of slider. How much do you have it set to slide?
|
|
|
|
Post by ejlove09 on May 22, 2018 14:24:52 GMT -5
Honestly I can’t remeber exactly now, but I think it’s about 3-4 inches.
|
|
|
|
Post by STROMI 121 on May 22, 2018 16:19:33 GMT -5
Are you sure that's enough. I run long slip yokes with more slide than that. Are you running a gas tank protector pinned in tight?
|
|
|
|
Post by ejlove09 on May 22, 2018 16:44:30 GMT -5
Are you sure that's enough. I run long slip yokes with more slide than that. Are you running a gas tank protector pinned in tight? I didn’t really think about that, maybe I should cut it down and give it a little more. I am planning on running a gas tank protector. Don’t know if it will be tight to the package tray but I’m gonna get it as close as I can. |
|
|
|
Post by STROMI 121 on May 22, 2018 20:18:19 GMT -5
Use a porta power to shove it tight before you weld it to the seat bar.
|
|
|
|
Post by redneckracing12 on May 22, 2018 21:28:42 GMT -5
Use a porta power to shove it tight before you weld it to the seat bar. X2 |
|
|
|
Post by rhull1977 on May 23, 2018 6:38:04 GMT -5
Not sure where you are running that one but shove the gtp tight and put a couple bolts in it. If you're running it at Franklin just make sure you don't have any leaks, the battery is tight and the brakes work.
|
|
|
|
Post by cheezwhiz31 on May 23, 2018 7:55:04 GMT -5
just my observation but it doesn't look like you have any slide on that slider? Cut out of both ends so if you cut 4 out of one side cut 4 out of other. I have had to cut everyone of mine. Have at least 4 inch of travel and you should be good. Tri oval have alot inside them so you shouldn't screw yourself if you run a short tail or longer car at some point.
|
|
|
|
Post by cheezwhiz31 on May 23, 2018 7:56:50 GMT -5
Are you sure that's enough. I run long slip yokes with more slide than that. Are you running a gas tank protector pinned in tight? If you look close i don't think the humps are going to kink. LOL |
|
|
|
Post by ejlove09 on May 23, 2018 8:03:28 GMT -5
Yeah I think I am going to cut it down a little. Looked at it last night again and noticed I have a lot less there then I thought. Beginners mistake I suppose. Wasn’t paying enough attention to it when I put it on.
|
|
|
|
Post by STROMI 121 on May 23, 2018 9:11:02 GMT -5
That's why we are trying to help.
|
|
|
|
Post by ejlove09 on May 23, 2018 9:38:54 GMT -5
That's why we are trying to help. [br And I greatly appreciate the info. I’d possibly still be scratching my head if it wasn’t for the tips. |
|
