cw09
Heat Winner
Posts: 528
|
Post by cw09 on Apr 17, 2018 21:07:07 GMT -5
What stock a arms and spindles can I get to make an 80s ford sit up higher? Will Chevy one ton 80s a frame work? Any suggestions. Thanks
|
|
|
Post by DerbyKing88s on Apr 17, 2018 22:00:20 GMT -5
Gm g body a arms work, and maybe the 70’s ford a arms
|
|
|
Post by redneckracing12 on Apr 17, 2018 23:14:06 GMT -5
How much higher are you trying to make it? You can get around 22" to bottom with stock front suspension and 7.00 15s. Even with smaller tires they still sit nice.
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,125
|
Post by demoboy333 on Apr 18, 2018 5:57:12 GMT -5
25 inch tall tire with stock parts I'm getting about 20 inches. That's cold bent. 25s are the tire height to keep the frint tires out of fire wall when it bends.But astro van an s10 spindles raise up the front. Then throw g body a arms on there get even more. I wouldn't go to much higher then 22 inches because then your only hurting your self an will nose car faster unless it's a mod car.
|
|
|
Post by backwoodsboys707 on Jun 11, 2018 20:40:47 GMT -5
I just put 70s Lincoln aarms on my 89 Merc and as it sits without being tilted it's at 27" and when I had stock tires on it it was at 25" to what bottom of bumper would be
|
|