|
|
Post by klicky96 on Apr 10, 2018 18:07:12 GMT -5
I quickly need an answer. Don't have the two in front of me. I need to know if the front horns from a-arm forward from a 98-02 will fit a box Lincoln frame. Something tells me the 98-02 have taller and wider horns.
|
|
|
|
Post by DerbyKing88s on Apr 10, 2018 20:00:25 GMT -5
If you could I would just restub at crossmember or firewall
|
|
|
|
Post by klicky96 on Apr 10, 2018 20:01:03 GMT -5
They don't have to match perfectly, just close enough to beat together and weld.
|
|
|
|
Post by DerbyKing88s on Apr 10, 2018 20:03:36 GMT -5
The horns might work, really don’t know, would be stronger to just restub the box with the 98-02
|
|
|
|
Post by klicky96 on Apr 10, 2018 20:07:14 GMT -5
The car isn't worth the effort to throw a good front stub under it. I have a 98-02 stub with twisted boxes but good horns. Not trying to waste good parts on a junk car.
|
|
|
|
Post by DerbyKing88s on Apr 10, 2018 20:10:55 GMT -5
Understandable, second best option would be just the 98-02 stub where it’s good and restub there but I suppose just doing it at the horns might be ok, I really don’t know if they will line up so I can’t help you there
|
|
improse
Feature Winner
Posts: 1,203
|
Post by improse on Apr 11, 2018 0:24:53 GMT -5
just restub the dam thing already.  if its taller/wider should be no problem. Leave some old frame in place slide over and weld away. |
|
|
|
Post by klicky96 on Apr 11, 2018 8:23:23 GMT -5
Lol I'm just throwing this hunk of sh*t toget her for a friend Tony. He wants to get his feet wet in a derby. The car is pretty used up. Not worth the extra time to throw a complete stub under it.
|
|
improse
Feature Winner
Posts: 1,203
|
Post by improse on Apr 11, 2018 23:24:30 GMT -5
nothing better then helping out a friend/rookie.
|
|
|
|
Post by redneckracing12 on Apr 12, 2018 11:17:25 GMT -5
I'd say just go for it. Iv seen guys do it before, iv seen 98-02 horns on 03^ and also on gm frames. A little slice here and there, hammering and welding you'll get them stuck on.
|
|
if its taller/wider should be no problem. Leave some old frame in place slide over and weld away. 