Tman21
Heat Winner
21 Ryan Timmerman 21
Posts: 396
|
Post by Tman21 on Feb 5, 2017 18:13:59 GMT -5
Engine is a '88 3.9 (basically a 318 missing 2 cylinders).Move the battery inside and must've cut a wire I wasn't supposed to... The only wires I removed were to the headlights/horn area. There's a chunk of grounds that I cut a few that went up to the headlight area as well. Engine turns over but it's not getting fuel. The fuel pump doesn't turn on when you turn the key. Can anyone lead me to a wiring diagram? Or any advice other than "change it to carb"
|
|
|
Post by triplerracer on Feb 9, 2017 3:54:27 GMT -5
Start putting grounds back that you cut out 1 at a time and see if that helps.
|
|
|
Post by Luke Wells on Feb 9, 2017 4:06:36 GMT -5
The fuel pump isn't running?
Why not try to run power through a switch to it?
|
|
Tman21
Heat Winner
21 Ryan Timmerman 21
Posts: 396
|
Post by Tman21 on Feb 12, 2017 22:41:31 GMT -5
Thanks guys. Haven't had time to mess with it since then. I plan on wiring it to a switch, but wasn't sure what that would do to the computer? We'll just have to see
|
|
|
Post by destroyer14 on Feb 13, 2017 0:32:26 GMT -5
Computer won't know even if you tell it.switch it and go
|
|
|
Post by jtrusty36 on Apr 27, 2017 18:58:59 GMT -5
Is there any way to run a tbi on a 318 without using a computer?? If so, how do I wire it up so it works as it should?
|
|