|
Post by 305junior on Nov 2, 2016 20:22:30 GMT -5
Hello im needing some advice or some input i got a clean 76 four door caddy but it has 2 bad spots of the driver side rear frame rail and i was really wanting to reclip the ass end with another type of old iron gm rear emd didnt no if any one has ever done anything like this before ive heard a few people say make a 98 amd up new style ford rear frame rails work but i do no the caddy frame rails are longer and the body mount holes r not gonna line up any help or advice or input would b greatly appericated u can comment on here or u can text me at 812-236-5919 thanks alot
|
|
|
Post by DerbyKing88s on Nov 2, 2016 20:39:08 GMT -5
You can't patch frame?
|
|
|
Post by DerbyKing88s on Nov 2, 2016 20:41:50 GMT -5
It would be a lot easier just to patch the frame, most promoters will let you do some sort of repairs if you just call.
|
|
|
Post by STROMI 121 on Nov 2, 2016 21:34:43 GMT -5
69-76 caddy frame rails will work but I agree completely with just patching the rusty rails on it. You don't use the back of a Caddy anyways.
|
|
|
Post by DerbyKing88s on Nov 2, 2016 23:37:28 GMT -5
Do you have a picture of the frame maybe or something? I can't imagine the rust is horrible if it's just the one frame rail. Plus like stormi said you don't use the back of caddies so if isn't horrible you might be ok without anything if your rules say no rust.
|
|
|
Post by 305junior on Nov 3, 2016 13:17:01 GMT -5
Yes i agree with not using the back end of a caddy but ive had a 75 caddy frame rail brake in half and its in the same spot were this frame rail is rusted and the 2 holes r pretty good sizes its on the outside of the frame rail and the bottom side its as soon as the frame comes down in the trunk pan from the back of the humps like right under neith the body mount bolt hole and ita gonna b a modified car any ways and some places will let me patch the holes but then that will take away 2 plates that im allowed to put on the front after its preran and the front if it ever noises up just trying to get some ideas and thoughts on whats the best thing to do in my situation
|
|
|
Post by 305junior on Nov 3, 2016 13:17:56 GMT -5
I got a pic on my phone but cant figure out how to post pics on here
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Nov 3, 2016 13:22:15 GMT -5
Yes i agree with not using the back end of a caddy but ive had a 75 caddy frame rail brake in half and its in the same spot were this frame rail is rusted and the 2 holes r pretty good sizes its on the outside of the frame rail and the bottom side its as soon as the frame comes down in the trunk pan from the back of the humps like right under neith the body mount bolt hole and ita gonna b a modified car any ways and some places will let me patch the holes but then that will take away 2 plates that im allowed to put on the front after its preran and the front if it ever noises up just trying to get some ideas and thoughts on whats the best thing to do in my situation best thing is to move ur plates around once the frame rolls up in the rear grind ur patch plates loose seems alot of people are moving fix it plates around on mods as car bends in the nose... there's a reason...
|
|