|
|
Post by hohman22x on Apr 5, 2017 11:44:02 GMT -5
Can we come down Thursday night to camp? Could last year. I'm assuming we can again this year. Thanks |
|
|
|
Post by thirteen on Apr 6, 2017 18:12:22 GMT -5
Looking at bringing a compact truck there is it possible to pay the day of the show instead of pre registering? In case I don't get my truck done.
|
|
|
|
Post by frankthetank on Apr 9, 2017 13:10:59 GMT -5
Looking at bringing a compact truck there is it possible to pay the day of the show instead of pre registering? In case I don't get my truck done. That class is a couple of spots from being full of you want a spot you need to go to smashitderby.com and get your entry |
|
|
|
Post by wldtmike07m on Apr 11, 2017 23:19:53 GMT -5
Last year there was a lot of spots left and people were paying and coming in at the gate for camping was wanting to know if that still can happen this year if we come Thursday night or do we have to send form in thanks
|
|
|
|
Post by smash101 on Apr 12, 2017 17:04:01 GMT -5
you can get a camp spot the day of show if you what if you come before Friday it will be 25 more per spot pre night
|
|
|
|
Post by crusher4x on Apr 12, 2017 20:07:33 GMT -5
maybe I over looked it, are they doing a raffle car this year?
|
|
|
|
Post by smashbob12 on Apr 12, 2017 21:01:01 GMT -5
|
|
|
|
Post by bull13 on Apr 12, 2017 21:44:20 GMT -5
When does presale end?? LATER  ? LATER |
|
|
|
Post by crashin213 on Apr 13, 2017 7:19:56 GMT -5
When does presale end?? LATER ? LATER may 5th i do believe |
|
crazychris03
Heat Winner
Enter your message here...
Posts: 398 
|
Post by crazychris03 on Apr 13, 2017 19:08:55 GMT -5
who is building the car this year |
|
|
|
Post by STROMI 121 on Apr 13, 2017 20:30:04 GMT -5
Im jealous. The raffle car is about six weeks further built than my car. I better get off here and start welding.
|
|
|
|
Post by akeaton22 on Apr 14, 2017 19:19:48 GMT -5
For the dec header compact class. Do the home made bumpers have to have a skin on them or can they just be plain box tubing. Are we aloud to run 2x2 box tubing 10 inches away from the front and back bumper or just the front?
|
|
|
|
Post by smashbob12 on Apr 15, 2017 16:13:01 GMT -5
For the dec header compact class. Do the home made bumpers have to have a skin on them or can they just be plain box tubing. Are we aloud to run 2x2 box tubing 10 inches away from the front and back bumper or just the front? BUMPERS 1.Homemade bumpers are permitted they must be no bigger than 8 ½ “ at any point no sharp or excessive points will be permitted, this will be measured with a fixture bumpers larger will not run no exceptions. There will not be a tolerance for the 8 1/2 “ measurement. If using a factory bumper it may be loaded or stuffed full. 2.Bumpers may be no lower than 14 ” and no higher than 20 ” to bottom of bumper this will be strictly enforced. Bumper seams may be welded metal may be added to bumper this must be done on the inside of the bumper front bumpe r only. Rear bumper may be seam welded no metal may be added to rear bumper. 3.Bumper shocks and bumper brackets may be welded to the frame. Bumper brackets and or shocks must be no longer than 10 ” in length and welded to outside of frame no shocks permitt ed inside of frame or body. You can hard nose the front bumper you may use a 2 ” x 6 ” x ¼ ” plate to weld bumper the frame 2 per mounting point these plates must be on side of frame not permitted on top or bottom of frame. You may weld shock to frame factory bumper shocks can only be 10 ” from end of frame and may not be moved back on frame. You may use 1/4" X 2" X 2" square tube or 2" round pipe or a 1" X 2" X 10" plate from the bumper back the frame 10" for bumper shocks Off the web sight, And I think the rules are on page 1. Rear bumpers CAN NOT have the 10" bumper shock. |
|
|
|
Post by 721flatrock on Apr 16, 2017 20:22:52 GMT -5
Im takin a chance here but would a nova bumper b allowed in the youth class
|
|
|
|
Post by junkit52 on Apr 16, 2017 20:29:55 GMT -5
Are there any compact spots still open?
|
|
?
