|
Post by steveb on Sept 28, 2016 11:09:49 GMT -5
I have a red block 318 in this and was wondering if the parts from a regular 318 will bolt on
|
|
|
Post by bluredvision on Sept 28, 2016 22:01:21 GMT -5
I assume you mean a 318 poly or 318 big block or 318 wide block... (all the same thing) I was looking it up about a month ago. not much is interchangeable but surprisingly more than you would think.. the entire list: Thermostat Thermostat housing Internally balanced 273-318-340 harmonic balancers Valve springs, retainers and keepers Main bearings Rod bearings Crankshafts Flywheel Starter, both standard and high torque 318 LA ring set timing chain and sprocket fuel pump oil pump oil pan distributor pump drive gear distributor, standard points or electronic found this at: www.1962to1965mopar.ornocar.com/poly318_1.html
|
|
|
Post by steveb on Sept 29, 2016 7:53:15 GMT -5
awesome thanks. looking to see if a intake off a regular 318 will bolt on as the 2 barrel that is on this one is junk. not sure if there is a particular two barrel to fit it or does any two barrel bolt on.
|
|