Punisher 66J
Feature Winner
F**K WELD CLASS, STOCK IS FOR TRUE DERBY DRIVERS!!!
Posts: 3,789
|
Post by Punisher 66J on Aug 19, 2016 15:07:58 GMT -5
I have been running with my cars torsion bars almost all the way up for years. I like it that way because it allows me to hit certain things easier while making it harder for people to peel my front clip off the frame. My only issue with this is the last couple years I smash my radiator because my bumper goes over a tire or something on another car and comes back and smashes the bottom of my radiator. Is anyone running a shorter radiator or have a remedy for this. If you are running a shorter radiator what is it out of. Thanks.
|
|
|
Post by NoDakSmack on Aug 19, 2016 18:52:35 GMT -5
You could cut the hole in your hood up to the radiator and raise the radiator up through the hood. Fold the hood sheet metal up in front of it.
|
|
|
Post by chrysler16 on Aug 21, 2016 13:27:19 GMT -5
Use a gm rad and weld a pice of angle iron between frail rails to hold it works like a camp and has the rad no lower than the bottom of the frame
|
|
dm440c
Feature Winner
derby drivers against drama- there's no crying in demo derby!
Posts: 2,824
|
Post by dm440c on Sept 10, 2016 20:16:08 GMT -5
how long are your heats? I haven't run a radiator with a Mopar engine for 7 or 8 years now
|
|
|
Post by seventyonehemicuda on Sept 11, 2016 14:19:43 GMT -5
^^Seriously? looped lines with relief valve? spill the beans. please.
|
|
|
Post by klicky96 on Sept 12, 2016 13:27:55 GMT -5
^^Seriously? looped lines with relief valve? spill the beans. please. Probably just using a newer style Mopar radiator cap.
|
|
Punisher 66J
Feature Winner
F**K WELD CLASS, STOCK IS FOR TRUE DERBY DRIVERS!!!
Posts: 3,789
|
Post by Punisher 66J on Sept 14, 2016 15:39:34 GMT -5
how long are your heats? I haven't run a radiator with a Mopar engine for 7 or 8 years now 10-15 minutes usually. We have to run a radiator.
|
|
dm440c
Feature Winner
derby drivers against drama- there's no crying in demo derby!
Posts: 2,824
|
Post by dm440c on Sept 25, 2016 8:07:34 GMT -5
^^Seriously? looped lines with relief valve? spill the beans. please. yeah just a T fitting with a radiator cap and either a loop hose or a holding tank
|
|