|
Post by terrorizer on Aug 14, 2016 23:22:07 GMT -5
I have a 75 440 that cuts out, spits sputters at full throttle. It idles fine and runs good till about 3/4 throttle, but after that it shoots some fire and just wont rev. Has new good quality points condenser, new gm coil, new edelbrock carb. Timing is set at 5 degrees BTDC. no vacume advanced hooked up. Ive tried multiple carbs and problem persists. I'm at a loss. Any help would be appreciated, thank you
|
|
hemi1
Feature Winner
Posts: 2,425
|
Post by hemi1 on Aug 15, 2016 10:23:39 GMT -5
too weak of valve springs???
|
|
dm440c
Feature Winner
derby drivers against drama- there's no crying in demo derby!
Posts: 2,824
|
Post by dm440c on Sept 10, 2016 20:14:42 GMT -5
valve float, point gap, check the distributor to see if the mechanical advance is working
|
|