|
Post by tatge66 on May 25, 2016 20:55:27 GMT -5
I have an 89 Lincoln with a SBC that's not tilted my question is if I tilt it will I have to move motor mounts and crossmember or will it still be the same
|
|
|
Post by justforfun1973 on May 25, 2016 21:23:52 GMT -5
Motor mounts no. Cross member yes. If ya leave stock member in, the tail end of trans and drive shaft might hit trans tunnel. Depending how far you tilt.
|
|
|
Post by tatge66 on May 25, 2016 22:11:51 GMT -5
My crossmember is 2x2 sitting on angle that's welded to the frame I thought about just putting the 2x2 under the angle that would drop the tail 2 inches
|
|
|
Post by justforfun1973 on May 25, 2016 22:15:48 GMT -5
That's plenty. Imo.
|
|
|
Post by tatge66 on May 25, 2016 22:18:20 GMT -5
Ok thanks
|
|