|
|
Post by kernalkrash on May 24, 2016 18:14:03 GMT -5
Just wondering if anyone knows if cutting out the sway bar would be a no no. Seems like it would possibly get pushed into the crank pulley on my crown Vic. Thanks
|
|
DTOM101
Heat Winner
"IT WOULD TAKE A COIL SPRING ON THE CARB TO KEEP MY FOOT OFF THE FLOOR"
Posts: 593
|
Post by DTOM101 on May 24, 2016 18:27:43 GMT -5
If you're not using a lower cradle yes cut it out along with lip on crossmember that can interfere with steering . If using a cradle keep away bar an bolt ends directly to lower control arms if they are welded down.
|
|
|
|
Post by kernalkrash on May 25, 2016 9:52:25 GMT -5
I thought so, thanks
|
|
|
|
Post by STROMI 121 on May 25, 2016 11:49:34 GMT -5
I always leave it in. I just heat and bend the middle down on cars without a PP. and always bolted to control arms.
|
|
