|
|
Post by limegreenmachine44 on Feb 3, 2015 21:21:42 GMT -5
Are the mid 90s magnum motors any good? If they are what all do I have to do to one to carb it?
|
|
|
|
Post by XtremeMopar#307 on Feb 3, 2015 23:21:11 GMT -5
Yes, there is some guys on here that run them... I'm buying one this weekend so I can get it put together I'm time for my metal mayhem ride.... If I remember correctly it just takes the intake and carb which I have priced out on eBay, you also must run electric fuel, and most ppl swap it the water pump to old style... Anyone feel free to correct me
|
|
|
|
Post by themopar17 on Feb 4, 2015 0:02:48 GMT -5
Yes, there is some guys on here that run them... I'm buying one this weekend so I can get it put together I'm time for my metal mayhem ride.... If I remember correctly it just takes the intake and carb which I have priced out on eBay, you also must run electric fuel, and most ppl swap it the water pump to old style... Anyone feel free to correct me You can run a mechanical fuel pump if you put the old style LA timing cover on and add the eccentric to the cam. |
|
|
|
Post by limegreenmachine44 on Feb 4, 2015 10:02:20 GMT -5
So do the older 2bbl intakes fit on these or do I need to buy a new intake
|
|
|
|
Post by metalman187x on Feb 4, 2015 11:11:29 GMT -5
the older intakes only fit up to 1992. the magnums started in 94 and need a custom ordered intake to be able to run a carb. i've tried this one before without any success and wasted a good magnum bottom end in the process
|
|
|
|
Post by themopar17 on Feb 4, 2015 11:23:09 GMT -5
Edelborck and Mopar make carbed intakes for magnums.
|
|
|
|
Post by derbydriver666 on Feb 4, 2015 12:54:35 GMT -5
There was a nasty Magnum in a Galaxie at Bash last year !
|
|
|
|
Post by XtremeMopar#307 on Feb 4, 2015 14:44:54 GMT -5
2nd place bone stock old iron shocker at blizzard bash this last year had a Magnum under the hood
|
|
|
|
Post by gearhead149 on Feb 10, 2015 2:13:18 GMT -5
Don't u need to change the oil pan?
|
|
|
|
Post by XtremeMopar#307 on Feb 10, 2015 8:10:24 GMT -5
I believe only to meet your application...
|
|
kj53
Heat Winner
Posts: 158
|
Post by kj53 on Feb 15, 2015 19:43:58 GMT -5
I've been running one for two years have to buy an intake for the magnum then I use dist.,timing chain cover, water pump and pulleys from a LA block but with that said the price of the intake 320.00 I could of bought 2 LA 360s
|
|
kj53
Heat Winner
Posts: 158
|
Post by kj53 on Feb 15, 2015 19:50:19 GMT -5
And I had to buy a hei dist. My motor did not like points or the pertronix conversion
|
|
|
|
Post by Sterling Archer on Mar 5, 2015 19:12:05 GMT -5
the older intakes only fit up to 1992. the magnums started in 94 and need a custom ordered intake to be able to run a carb. i've tried this one before without any success and wasted a good magnum bottom end in the process Magnums started in 92. The last old style engine in trucks was 91. |
|
|
|
Post by Sterling Archer on Mar 5, 2015 19:13:01 GMT -5
I'm wanoting to build a 5.9. What cams are you running?
|
|
|
|
Post by chevykillerx13 on Mar 6, 2015 11:35:59 GMT -5
I'm wanoting to build a 5.9. What cams are you running? 318 magnum cams do really well in the 360s. |
|
