|
Post by teammass22 on Sept 8, 2015 22:09:52 GMT -5
The core support is off,, just some fitting and welding and on to the next step,, couldn't have done it without your advice!
Now I'm needing help with wiring my duraspark box? Any tips or pointers?
|
|
|
Post by C4 on Sept 8, 2015 23:49:41 GMT -5
The core support is off,, just some fitting and welding and on to the next step,, couldn't have done it without your advice! Now I'm needing help with wiring my duraspark box? Any tips or pointers? I would point you to the 2.3 wiring thread. Dura Spark is Dura Spark. Don't matter if it's a 1.6 or a 512
|
|
|
Post by teammass22 on Sept 9, 2015 13:25:34 GMT -5
Thanks c4 I'm checking into it
|
|
MAC01
Future Icon
Posts: 144
|
Post by MAC01 on Sept 9, 2015 14:02:31 GMT -5
I've got non shortened foxes figured out, but shorter is better. Care to share? or PM me, otherwise I don't run stock shows with them.
|
|
|
Post by C4 on Sept 9, 2015 14:11:15 GMT -5
No good for bone stock, but for semi stock, a little frame sculpting, hood bolt/all-thread placement, engine strap placement, and a stiff yet lightweight bumper will go a long way.
|
|
|
Post by teammass22 on Sept 14, 2015 22:58:43 GMT -5
Does anyone have any pictures of back end setups for a sedan marquis, ltd, or fairmont?
|
|
|
Post by teammass22 on Sept 14, 2015 23:11:26 GMT -5
Thanks that was quick,,, did you notch or dimple?
|
|
|
Post by teammass22 on Sept 14, 2015 23:20:25 GMT -5
That's a pretty mean looking marquis
|
|
|
Post by teammass22 on Sept 14, 2015 23:41:11 GMT -5
I didn't realize hahaha but thanks for reposting and for the tips
|
|
|
Post by taterjuice on Sept 15, 2015 8:40:43 GMT -5
Thanks that was quick,,, did you notch or dimple? heavy notch and prebend. Didn't use it much but it's headed up. Also another technique in play here I've used on all my cars so far. If you don't notice it I'm not telling either.
|
|
|
Post by teammass22 on Sept 15, 2015 10:48:28 GMT -5
I guess it's gonna stay a secret ? I couldn't see it,, thanks for the tips, did you just notch at the filler neck or did you notch near the humps too?
|
|
|
Post by taterjuice on Sept 15, 2015 13:46:24 GMT -5
One notch but when I prebent it also made its own dimples closer to the humps. Where you notch at depends upon location of trunk and how far forwards your trunk is tucked. Either pic shows it if you look. It's not hidden but in plain sight, last thing you'd notice. Message me if you think you spotted it.
|
|
|
Post by 513monster on Sept 15, 2015 15:47:24 GMT -5
I saw it at first glance, but im not sure if that'd even help for what "I think" you are going for
|
|
|
Post by klicky96 on Sept 20, 2015 21:16:49 GMT -5
Probably crazy, stupid or both, but I'm working on fixing her for a clean up show in a few weeks... You running the fall cleanup in norwalk?
|
|
|
Post by klicky96 on Sept 20, 2015 22:14:46 GMT -5
Lol yeah, it's bad. I'm building a 5ft car for it now.
|
|