demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Jul 4, 2017 20:50:08 GMT -5
Trailer rims 14 inch which are thick.
|
|
|
Post by JR/77x on Jul 14, 2017 17:28:23 GMT -5
Are the 90's astro rims any good. The 8 hole ones There's a ford wheel thread and a gm wheel thread please go to the gm section and as far as I can tell ya there's no such thing as a "stock" 8 hole astro...
|
|
|
Post by ckennedy110x on Jul 18, 2017 5:19:21 GMT -5
Can anyone tell me what rims to run on a 04 p71. It had 16 in rims I want to put 15in on it. Thanks
|
|
|
Post by STROMI 121 on Jul 18, 2017 8:08:02 GMT -5
Can anyone tell me what rims to run on a 04 p71. It had 16 in rims I want to put 15in on it. Thanks Are you running the stock suspension?
|
|
|
Post by ckennedy110x on Jul 18, 2017 8:17:53 GMT -5
Yes. Its a stock show
|
|
|
Post by plumcrazy46 on Nov 25, 2020 4:35:32 GMT -5
What size tires is everyone running on the front of vics? 7.00x15 get into the firewall when it pushes back. 23S or 25s?
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Nov 25, 2020 6:39:41 GMT -5
Anything 25 inch tall. Most run bkt 5.50 15s.
|
|
|
Post by plumcrazy46 on Nov 27, 2020 15:19:11 GMT -5
What are the width and height of these? Can't find any info online
|
|
|
Post by driver227 on Nov 28, 2020 7:08:52 GMT -5
What I see is 26.4 diameter for bkt 5.50
|
|
noser23x
Feature Winner
R.W.C.
Posts: 1,969
|
Post by noser23x on Nov 29, 2020 1:05:13 GMT -5
Height will be dependent on rim width you are running them on. Wider rim you will lose a little height, narrower rim will gain a little. They are meant for a 5.5" rim though. I like them on trackers.
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Nov 29, 2020 1:23:02 GMT -5
Height will be dependent on rim width you are running them on. Wider rim you will lose a little height, narrower rim will gain a little. They are meant for a 5.5" rim though. I like them on trackers. Are tracker rims pretty narrow already or do they need narrowed?
|
|
|
Post by settleit on Nov 29, 2020 1:35:37 GMT -5
Height will be dependent on rim width you are running them on. Wider rim you will lose a little height, narrower rim will gain a little. They are meant for a 5.5" rim though. I like them on trackers. Are tracker rims pretty narrow already or do they need narrowed? They're narrower already. 5.5" inside lip to inside lip. Had a set of jeep rims with 700-15s and replaced with some 5.50s on trackers and the gap between balljoint and tire was considerably noticeable between them.
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Nov 29, 2020 10:21:33 GMT -5
Are tracker rims pretty narrow already or do they need narrowed? They're narrower already. 5.5" inside lip to inside lip. Had a set of jeep rims with 700-15s and replaced with some 5.50s on trackers and the gap between balljoint and tire was considerably noticeable between them. I got a set of ranger 7 spoke with center in them with 7.00 15s and they rub that's why I ask. Buddy has some Tracker rims I'll have to buy then and see how they hold up for me. I run 7.00 12s that are 12 ply now which are 25 tall on my fords but I like the have few to pick from.
|
|
noser23x
Feature Winner
R.W.C.
Posts: 1,969
|
Post by noser23x on Nov 29, 2020 20:32:07 GMT -5
They're narrower already. 5.5" inside lip to inside lip. Had a set of jeep rims with 700-15s and replaced with some 5.50s on trackers and the gap between balljoint and tire was considerably noticeable between them. I got a set of ranger 7 spoke with center in them with 7.00 15s and they rub that's why I ask. Buddy has some Tracker rims I'll have to buy then and see how they hold up for me. I run 7.00 12s that are 12 ply now which are 25 tall on my fords but I like the have few to pick from. I like them, especially for stocker shows with stock spindles with a full 1/4" center. When picking any rim, width matters and back spacing. Thats what sets your distance to ball joint.
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Nov 29, 2020 23:52:24 GMT -5
I got a set of ranger 7 spoke with center in them with 7.00 15s and they rub that's why I ask. Buddy has some Tracker rims I'll have to buy then and see how they hold up for me. I run 7.00 12s that are 12 ply now which are 25 tall on my fords but I like the have few to pick from. I like them, especially for stocker shows with stock spindles with a full 1/4" center. When picking any rim, width matters and back spacing. Thats what sets your distance to ball joint. I built the stock Rangers for 70s gm but won't work on 90s bubbles with out hitting. I've thought of narrowing them.
|
|