|
Post by fordpower111 on Feb 25, 2013 21:15:42 GMT -5
My very first set came off a 82' Lincoln.
|
|
|
Post by bigblocker17x on Feb 26, 2013 11:23:54 GMT -5
I think mine came off an 83' mark iv but this is how my car was set up after the first derby before the first figure 8 rim/tire wise Attachments:
|
|
|
Post by fordpower111 on Feb 26, 2013 11:31:06 GMT -5
We have never ran those wire one's, but my brother has a full set of them somewhere. Are those tires on the rear military tire's?
|
|
|
Post by bigblocker17x on Feb 26, 2013 11:40:19 GMT -5
Yeah 700 x 15 military jeep tires they have an incredible sidewall and the rounded edges helps cut into the mud like a knife and dig but i think ill try something new this year and get a set of these for the front
|
|
2v
Future Icon
Posts: 23
|
Post by 2v on Jun 12, 2013 12:29:54 GMT -5
what size tires are you guys running on 14" wheels I can't run implement tires either? thanks
|
|
|
Post by atrain21 on Oct 10, 2013 21:04:15 GMT -5
I have 10 spoke explorer wheels.. and I was just wondering what I need to do to make sure they hold alright. They are steel with the chrome film over them. What do you do for valve stem protection? Thanks
|
|
|
Post by aoldfart on Oct 11, 2013 15:37:51 GMT -5
Some people use short pieces of re-bar and weld them on each side of the stem. And I've head some use a rocker arm from a old engine, and weld that. The stem sets in the hole.
Steve
|
|
x909x
Heat Winner
Posts: 293
|
Post by x909x on Oct 11, 2013 16:46:11 GMT -5
Last couple 10 spokes I've run bent first run out. To strengthen them do like any wheel to strengthen it and add a full center. The valve stems recessed, I haven't had an issue there.
|
|
|
Post by atrain21 on Oct 18, 2013 10:55:44 GMT -5
Okay thanks! I didn't think the stems would be a big deal not bein protected. . Just wanted some greatly appreciated input. Thanks again!
|
|
|
Post by ibleedfordblue on Oct 23, 2013 12:02:06 GMT -5
these won't work on the front though Jeep rims work on the stock fronts. That's what I put on mine anyway
|
|
|
Post by ibleedfordblue on Oct 23, 2013 12:05:58 GMT -5
Come to think of it I did have to grind the very edge of the aarms but like someone said I've never seen them Chrome. I'd just go with Chrome rangers
|
|
|
Post by jake16 on Nov 28, 2013 18:33:59 GMT -5
Is There Any 14in Rim That Will Fit A Stock 8.8 With Disc Brakes?
|
|
|
Post by lunchboxxx on Nov 29, 2013 16:40:18 GMT -5
Will 16" rims off of a 01 ranger fit on a bubble or box ford?
|
|
357X
Future Icon
Posts: 47
|
Post by 357X on Nov 30, 2013 18:19:29 GMT -5
Is There Any 14in Rim That Will Fit A Stock 8.8 With Disc Brakes? 14in mustang or 2x4 ranger will work
|
|
|
Post by dpracing on Jan 20, 2014 23:17:05 GMT -5
Are the chrome f150 wheels any good?
|
|