Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 5, 2018 13:50:13 GMT -5
Not sure what year,but the fairlanes started going unibody
|
|
|
Post by DerbyKing88s on Aug 5, 2018 14:00:14 GMT -5
Not sure what year,but the fairlanes started going unibody would it still be a good car?
|
|
|
Post by Luke Wells on Aug 5, 2018 14:04:58 GMT -5
Not sure what year,but the fairlanes started going unibody 1961 is the Galaxie style frame. 62 is the midsize unibody design.
|
|
|
Post by Luke Wells on Aug 5, 2018 14:07:00 GMT -5
Not sure what year,but the fairlanes started going unibody would it still be a good car? I've personally never seen one run, but guys claimed the front suspension was worse than any other old ford. Believe, but don't quote me, that the front has shock towers similar to a unibody T bird. I think when they did change (62 being the 1st year of unibody), they were based off the midsize Falcon.
|
|
|
Post by DerbyKing88s on Aug 5, 2018 14:16:12 GMT -5
We would pretty much change all the steering, different spindles a arms, tie rods. Pretty much set up like a t bird or suicide?
|
|
|
Post by Luke Wells on Aug 5, 2018 14:20:34 GMT -5
We would pretty much change all the steering, different spindles a arms, tie rods. Pretty much set up like a t bird or suicide? Go for it. But nobody runs them for a reason. The front rails are very small compared to a Suicide or Bird.
|
|
|
Post by DerbyKing88s on Aug 5, 2018 23:30:03 GMT -5
Does anyone know off hand if the 70’s Ford a arms bolt up to a 62 fairlane without mods? If no one knows off hand i’ll Take measurements and post I guess. Front is not bad height wise stock but suspension isn’t very good so i’d Like to switch plus get it as tall as possible. Is there a thread for these, I know this thread doesn’t “technically” cover them but don’t know of a different thread. Thanks guys.
|
|
|
Post by Luke Wells on Aug 5, 2018 23:48:20 GMT -5
Nope. No thread.
Post some pictures and info and start a thread.
|
|
|
Post by DerbyKing88s on Aug 6, 2018 0:01:37 GMT -5
Ok thanks, i’ll Post info on here, will do a build thread on it when we get to it
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 19, 2018 18:15:44 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 19, 2018 18:16:41 GMT -5
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 19, 2018 18:18:37 GMT -5
73 LTD spindles and brakes fit,as for the LS fitment,was a headache
|
|
|
Post by derbyn00b on Aug 19, 2018 22:55:29 GMT -5
What bumper brackets are those above?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 20, 2018 6:56:26 GMT -5
74 or 5 impala rears
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Sept 8, 2018 23:43:47 GMT -5
|
|