XXX
Heat Winner
Posts: 346
|
Post by XXX on Aug 14, 2012 20:51:54 GMT -5
Any way of running smaller wheels on back of truck that had 16" wheels?
|
|
|
Post by knuckles666 on Aug 14, 2012 21:22:27 GMT -5
get you some wheel center cut out for 15's, what rearend are u running
|
|
schirado36
Feature Winner
ND STATE REP
Posts: 1,052
|
Post by schirado36 on Aug 15, 2012 0:17:11 GMT -5
like i said i run 14's on the back of mine... i have a 9" inch ford rear in my chevy pickup... with the 5 x 5.5 bolt pattern... just take 14 inch rims and cut the middles out and weld in centers... work awesome... help drop alot of height... my 14's are 12 plys... and are only 24-25 inches tall
|
|
nh437
Future Icon
Posts: 138
|
Post by nh437 on Aug 15, 2012 7:22:27 GMT -5
I run a ford nine inch also with 15s n 27 inch skid steer tires ... You can buy short tractor tires for 16s u just have to find them ... I believe the website is nebraskatire.com they have 6.00x16 R1 tractor tires
|
|
|
Post by reece15 on Aug 17, 2012 21:46:42 GMT -5
i ran 6.50 16s vtreads on rear . worked good
|
|
schirado36
Feature Winner
ND STATE REP
Posts: 1,052
|
Post by schirado36 on Aug 19, 2012 10:36:35 GMT -5
24 x 8.50 x 14's - 12 ply
|
|
|
Post by hendy53 on Jul 14, 2015 18:42:58 GMT -5
So you weld the 16in centers into a smaller rim? Will brake drums make a clearance issue?
|
|
|
Post by dontknowhowtoweld on Jul 26, 2015 6:55:27 GMT -5
Depends what rearend you are running. I welded 8 lug centers on 15" rims to run on my corp 14 bolt. Not sure if you can run 14s on the 14 bolt though. I would not run a 9" in any derbies that I run. They would break fast.
|
|
|
Post by hendy53 on Jul 27, 2015 17:00:51 GMT -5
I have a corporate 14 also so that should work..I've been having troubles finding the heavy ply 16" tires
|
|
|
Post by hendy53 on Jan 12, 2016 15:30:14 GMT -5
I was thinking of trying 14's. Has anyone put 14's on a corporate 14? I might just have to give it a try.
|
|
|
Post by C4 on Jan 13, 2016 1:17:20 GMT -5
Have 2 dana 60's. Use 15" dodge 10 slots with after market weld in centers. bought the wheels with centers welded in from leadslead71 on here. Best picture I have on hand, installed.
|
|
|
Post by rookieagain on Apr 27, 2016 13:44:40 GMT -5
What you guys think about 6.00x16? Too narrrow? Too big?
|
|
|
Post by demotruck22 on Apr 29, 2016 18:19:00 GMT -5
7.50-16 is what I usually ran.
|
|