|
Post by junkitup on Feb 17, 2019 0:21:48 GMT -5
gotcha thanks for your help
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Feb 17, 2019 7:14:41 GMT -5
gotcha thanks for your help Put level in the front rails as you figure out the spacer height. I had rear way low should be pics on here of it an in had 2inch an firewall an 1inch by my seat. Want to say 9 inch at coresupport so I could keep radiator safe when going over bumpers on fwds
|
|
|
Post by junkitup on Feb 23, 2019 21:52:49 GMT -5
heck yea sounds good this one will have kickers and all. also there a reason no one runs 14s on the front mine come with 14s on the front plenty of caliper clearance
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Feb 24, 2019 6:48:01 GMT -5
I ran 15s for height since I was putting the rear low. I don't see where 14s could hurt to run.
|
|
|
Post by junkitup on Feb 24, 2019 12:55:33 GMT -5
i was just looking for wheel clearance cause 15s get in the firewall fast
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Feb 24, 2019 13:06:26 GMT -5
i was just looking for wheel clearance cause 15s get in the firewall fast Not with kickers
|
|
|
Post by junkitup on Feb 24, 2019 17:46:05 GMT -5
i suppose the height will determine tire size. any tips for a arms forward from bending
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Feb 24, 2019 20:11:15 GMT -5
i suppose the height will determine tire size. any tips for a arms forward from bending Pm me with the bumper shock rules.
|
|
|
Post by junkitup on Feb 25, 2019 9:52:22 GMT -5
sent
|
|
|
Post by junkitup on Mar 23, 2019 22:02:07 GMT -5
what rear ends you guys runnin in these cars my 10 bolt i have is a touch wide
|
|
demoboy333
Feature Winner
Enter your message here...
Posts: 3,124
|
Post by demoboy333 on Mar 23, 2019 22:10:35 GMT -5
I've saw 14bolt, 9inchs 10 bolts. I had a 90s model toyota under mine for personal reasons.
|
|
|
Post by C4 on Mar 23, 2019 23:28:29 GMT -5
Have a 9" in mine.
|
|
|
Post by junkitup on Mar 24, 2019 17:41:42 GMT -5
yea my 10 bolt that i have built is 3 inches wider backing plate to backing plate
|
|
|
Post by C4 on Mar 24, 2019 18:12:46 GMT -5
Use fwd rims or something with similar offset like 4x4 S10 wheels to make up for it.
|
|
|
Post by junkitup on Mar 25, 2019 6:48:09 GMT -5
see what i can find to fit on it to keep the wheels in
|
|