|
Post by STROMI 121 on Jan 23, 2012 14:00:27 GMT -5
Should be secured at four corners at the lowest possible point on the suspension using adequately rated chains or straps.
Where's crusher?
|
|
21w
Heat Winner
Posts: 205
|
Post by 21w on Jan 23, 2012 18:42:14 GMT -5
we usually use a chain on the front and then one on the back at opposite corners, but some one stole them when i had my mustang on the trailer in town.
the car is light so it moved on the trailer some and wasnt thinking and had the e-brake on which doesnt work hardly and it was in nuetral (4 speed). stupidd mistake
crusher as in scrapping it?
|
|
vona112
Feature Winner
Posts: 1,322
|
Post by vona112 on Jan 23, 2012 19:07:02 GMT -5
No CRUSHER is a former member who got the boot and would have had a field day with this story.
|
|
21w
Heat Winner
Posts: 205
|
Post by 21w on Jan 23, 2012 21:42:35 GMT -5
thanks vona112. ive head crusher but never knew what it ment
|
|
vona112
Feature Winner
Posts: 1,322
|
Post by vona112 on Jan 27, 2012 16:36:38 GMT -5
91 Accord wagon. Battery light is on from idle to around 5500 or 6000 rpm then goes off above that. Bad alternator? Noticed this after it was stripped not sure if it was on before.
|
|
|
Post by C4 on Apr 7, 2012 0:32:16 GMT -5
Anyone got any after pics of the rear of a notched Honda, trunk style? We dimpled ours, but it bent WAY ahead of the dimples.
|
|
|
Post by BONESHAKER on Apr 13, 2012 8:34:37 GMT -5
if allowed 9 wire in 1/4 a door windows in the crx model use it to the max allowed i have bout 170ft worth in my 90 crx. i have double strand in my hatch in a X from my halo down to each 1/4 panel. double strand from rear bumper up to the washers the hatch X is attached to. then double strand in my 1/4 windows from my halo down to the rear part of the 1/4 windows like / but sharper angle and for the door windows from the Apillar down to the 1/4 panel just behind the door cause i heard they like to belly out infront of the rear tires. id post pics but there on my cell and im using my ps3 for internet usage cause my pc crashed
if anyone needs pics or can post pics pm me ur cell # and ill txt them to you thanks
|
|
|
Post by C4 on Apr 13, 2012 19:02:25 GMT -5
I don't know about CRX, but both our Accords...2 door and 4 door bellied pretty good.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 13, 2012 21:06:19 GMT -5
my 88 civic hasn't bellied yet and we still haven't used the rear,only used the front so far and they are really tough.
|
|
|
Post by C4 on Apr 13, 2012 23:06:29 GMT -5
If the '90 survives Nebraska in July, you'll get to beat on it in August. Sucks that most fwd's have weak back ends. Fwd's seem to be more fun in reverse.
|
|
Brandamn
Future Icon
"if you aint on the gas you must be suckin @$$!"
Posts: 98
|
Post by Brandamn on Apr 15, 2012 19:33:04 GMT -5
.......OR, how difficult would it be to re-mount the alternator where the ac compressor. And I agree with the PS opinion on MOST compacts. Not sure if it was answered butmy tip is dont take off the ac compressor.... its a timing belt saver imo....
|
|
|
Post by reggler on Apr 15, 2012 21:37:34 GMT -5
Have you guys ever made a distributor protector or even a crank pulley protector? I was looking at my civic today and noticed the crank is seen clear as day hanging out under the frame rails.
|
|
|
Post by derbynut44 on Jun 20, 2012 17:42:12 GMT -5
i have a 93 honda accura 4 door. just curious if they are any good?
|
|
vona112
Feature Winner
Posts: 1,322
|
Post by vona112 on Jun 20, 2012 20:58:52 GMT -5
Yes read back thru the previous pages on this thread, lots of good tips. Anything specific feel free to pm me, I have built too many of these damn things.
|
|
|
Post by HogWild22 on Jul 6, 2012 17:25:28 GMT -5
hey guys im wanting to put a different bumper on the front could someone help me on how to mount it up thanks
|
|